I have an idea for a world, a name, pages of lore, a seed and everything. I am looking for some people to help me get it going. I may use something like Godlike hosting. I would love to have several people to join and help me build it out before gameplay.
Any takers??
Preferably an established server with lots of land I can claim, but a newer one would do just fine. I just want to be able to play with lots of people and have people to build with but I want to run my own faction.
Hello! I am considering constructing a new enclosure for my Toyota highlander limited. I only have MAX 14" from third row seats back to the hatch trim, and only really 13" of that is usable across the whole back of the cargo area. So basically the enclosure I am looking at is sorta like this:Bottom Panel - 12.5" deep
Top Panel - 6 1/2" deep
Overall Height - 24"
Overall Width - 42"
Driver's side top width max - 13.5"
Pax side " " - 13.5"
Driver's & Pax side height from bottom amp rack deck - 14"
Width from side to side, Driver to Pax side enclosure mains - 14.5"
Overall Depth from amp rack deck to 3rd row - 10.5"
The enclosure is like a "U" shape with the amp rack mounted vertically on the amp deck in between the two main enclosure sides. I am tentatively going to go with 2 of the higher rms sundown 10's, 1 each mounted in the side panels facing the wheel well areas (i wanted to go with 12's but I have a 12 now and it is mounted facing the hatch, and 12's wouldnt work for this new enclosure as I dont have enough room)
The enclosure would be one single enclosure with the ports (2) vertically side by side about 7" x 4" each surface cutout and each running down the front side of the enclosure towards their respective sub on either side of the enclosure. The amp rack, mounted vertically in between the two main enclosure areas on either side, will run the full height almost of the enclosure and rest on the amp rack deck which will be 10" off the cargo floor. That 10" height by about 14.5" width is where the ports will live and extend towards each side subwoofer.
sorry if I overexplained it. I havent gotten around to drawing an enclosure sketch yet but I will. I plan on using 2 amps, one for each sub. I am thinking the 3250 or 3500 wrms sundowns. This enclosure design I came up with will allow me about 1.7-1.8 cu ft per sub after internal port area, bracing, etc. Plan to tune to 32 hz. .75" birch outside panels with .5" for the port and bracing.
I would like to see pics of enclosures that are also "U" shaped or similar, and bonus points for enclosures with an amp rack sitting between the two main sides. I dont care if the subs fire out towards the back of the vehicle (both mounted on same panel) or on the sides, whatever.