u/History_Recolored

I Finally Finished My Pool Lighting Wiring… And THIS Sealed It Up

**I Finally Finished My Pool Lighting Wiring… And THIS Sealed It Up**

Product used in this video - https://amzn.to/4tVau4O

After weeks of wiring my 12V pool lighting project, it was finally time to button everything up with the right outdoor electrical protection. In this video, I install the Bell PTC521GY 2-Gang Weatherproof Cover for my outdoor GFCI outlet and toggle switch setup — and show exactly how to make it look clean, safe, and professional.

If you're working on outdoor electrical projects, pool lighting installs, low voltage lighting systems, GFCI outlet protection, or weatherproof electrical boxes, this DIY walkthrough will help you understand how to properly install and seal an outdoor switch and outlet cover for long-term durability and code-friendly protection.

This Bell Outdoor cover by Hubbell is designed for wet locations and includes an in-use weatherproof design that works perfectly for outdoor pool equipment areas, patio electrical setups, landscape lighting systems, and backyard electrical upgrades. I go over the installation process, fitment, hardware, gasket sealing, and final button-up of the electrical box as part of my ongoing 12 volt pool lighting project.

This setup includes:

* Outdoor GFCI outlet protection
* Toggle switch weatherproofing
* Bell PTC521GY polycarbonate cover
* NEMA 3R wet location protection
* Pool lighting electrical installation
* Outdoor electrical box finishing
* DIY home improvement electrical work

Whether you're installing pool lights, landscape lighting, patio outlets, or simply upgrading old outdoor electrical covers, this video gives you a realistic look at the process from start to finish.

This pool lighting project uses Hayward low voltage lighting components and outdoor electrical protection designed to survive harsh New England weather conditions here in Rhode Island. Proper sealing and weatherproofing are critical when working around pools, moisture, and outdoor electrical systems.

If you've ever wondered:

* How to install an outdoor GFCI cover
* How to weatherproof a pool light switch
* Which Bell outdoor cover to buy
* How to protect outdoor electrical boxes
* How to finish a pool lighting electrical project cleanly

…this video should help.

👇 Let me know in the comments:
Would you use this style cover on your own outdoor electrical setup?

If you enjoy DIY pool projects, electrical installs, backyard upgrades, and honest product walkthroughs, make sure to subscribe because there’s a LOT more coming as this backyard transformation continues.

🎥 Related Videos:

* Hayward ColorLogic Pool Light Installation
* 12 Volt Pool Lighting Wiring Guide
* Pool Equipment Pad Electrical Upgrades
* Outdoor GFCI Installation Tutorials
* DIY Pool Renovation Series

⏱️ TIMESTAMPS
00:00 – Finishing the Pool Lighting Project
00:11 – Testing the Toggle Switch Position
00:43 – Bell PTC521GY Cover Fit Check
01:10 – Starting the Outdoor Cover Installation
02:01 – GFCI Outlet & Switch Alignment
02:08 – Tightening the Weatherproof Gasket
03:11 – Securing the Cover Screws
03:39 – Goodbye Plastic Bag Weather Protection
04:11 – Testing the On/Off Toggle Operation
04:38 – Creating a Watertight Seal
05:13 – Final Screw Tightening & Fitment
05:22 – Installing the On/Off Label
06:13 – Final Thoughts on the Sticker Placement
06:46 – Finished Weatherproof Electrical Box Reveal
06:56 – Final Sealed GFCI & Switch Walkthrough

👍 Don’t forget to LIKE, SUBSCRIBE, and turn on notifications so you don’t miss future pool lighting, DIY electrical, and backyard project videos.

#PoolLighting #OutdoorElectrical #DIYHomeImprovement #GFCI #PoolRenovation

►►Shop my Amazon Store - https://www.amazon.com/shop/papaknowsstuff
►►SUBSCRIBE HERE: https://www.youtube.com/channel/UCoh5t0qa8U5uk6pOIqXkj9g?sub_confirmation=1
►►Follow Us On Facebook: https://www.facebook.com/profile.php?id=61585318744758
►►Any business inquires can be sent to: phjohnson@outlook.com
►►Interested In Donating To PapaKnowsStuff? :
https://www.paypal.com/donate/?hosted_button_id=36RXDLAWUAFXW

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

As an Amazon Associate and eBay Partner I earn from qualifying purchases, this does not affect the price you pay at all. Clicking a link to eBay or Amazon may result in a referral commission being paid to us if a purchase is made.

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 11 hours ago

▲ 1 r/papa_knows_stuff

DON’T Install Pool Lighting Without This Weatherproof Cover

**DON’T Install Pool Lighting Without This Weatherproof Cover**

Here is where I got this - https://amzn.to/3PSu57E

In this video, I unbox and install the Bell PTC521GY 2-Gang Weatherproof Switch and Outdoor Outlet Cover while finishing up my pool lighting project. If you're wiring outdoor electrical boxes, GFCI outlets, pool lights, landscape lighting, or weatherproof switches, this outdoor electrical cover might be one of the easiest and most important upgrades you can make.

I walk through the Bell weatherproof outlet cover design, build quality, installation features, and why NEMA 3R-rated outdoor electrical protection matters for pool equipment and exterior wiring. This UFAST 8-in-1 weatherproof cover supports multiple configurations and is designed to protect outdoor GFCI outlets and toggle switches from rain, moisture, debris, and harsh weather.

Whether you're working on pool lighting, landscape lighting, patio outlets, outdoor kitchens, pumps, transformers, or backyard electrical upgrades, this video shows what you need to know before installing outdoor electrical covers correctly.

The Bell PTC521GY polycarbonate weatherproof cover is designed for durability and easy installation, making it ideal for DIY homeowners, electricians, and pool owners trying to keep outdoor electrical connections protected and code-friendly.

If you're following along with my pool lighting project series, this is one of the final steps in protecting the outdoor electrical system before everything goes live. Outdoor electrical safety is critical around pools, and proper weatherproof outlet covers help protect your GFCI outlets and switches from water intrusion and weather exposure.

In this video:

* Bell PTC521GY unboxing
* Weatherproof outdoor outlet cover overview
* GFCI and toggle switch protection
* Pool lighting electrical setup
* Outdoor electrical box protection
* NEMA 3R outdoor cover features
* UFAST 8-in-1 mounting system
* DIY outdoor electrical project tips

If you enjoy DIY pool projects, electrical installs, home improvement tutorials, outdoor lighting upgrades, and product reviews, make sure to subscribe because there’s a lot more coming as this pool project gets completed.

👇 Let me know in the comments:
Would you use this style weatherproof cover for your outdoor electrical setup, or do you prefer metal covers instead?

▶️ Related Videos:

* Pool Lighting Installation Series
* Hayward ColorLogic LED Pool Lights
* Outdoor Electrical DIY Projects
* Pool Equipment Pad Upgrades

⏱️ TIMESTAMPS
00:00 – Finishing My Pool Lighting Electrical Project
00:38 – Bell Weatherproof Cover Unboxing
01:05 – Hardware, Gaskets & Included Parts
01:16 – How the Toggle Switch Mechanism Works
01:34 – GFCI Outlet Configuration Explained
02:01 – Hidden Screws & Waterproof Design
02:24 – Why the Cover Looks “Upside Down”
02:42 – Final Thoughts on the Bell Outdoor Cover

👍 If this video helped you, hit LIKE, SUBSCRIBE, and turn on notifications so you don’t miss the next phase of the pool lighting build.

#PoolLighting #OutdoorElectrical #HomeImprovement #DIYElectrical #PoolProject

* Bell PTC521GY
* weatherproof outlet cover
* DIY electrical
* pool lighting
* outdoor electrical box
* home improvement
* landscape lighting
* GFCI outlet

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 11 hours ago

▲ 1 r/papa_knows_stuff

Day 14 Pool Startup | Fresh Gunite Refinish Water Chemistry Update

**Day 14 Pool Startup | Fresh Gunite Refinish Water Chemistry Update**

Test Kits I use and recommend -
https://amzn.to/4foBrtS
https://amzn.to/4tDJhDC

Fresh gunite pool startup Day 14 is complete, and the water chemistry is finally starting to track consistently! In today’s update, I walk through the exact test readings, the corrective chemical adjustments I made, and how the newly refinished pool surface is responding after two weeks of startup care.

If you're going through a fresh plaster, pebble, quartz, or gunite pool startup, this series shows the REAL daily process — including chlorine adjustments, pH balancing, alkalinity management, calcium hardness tracking, and CYA stabilization. Today’s readings showed chlorine at 1–2 ppm, pH at 7.6, alkalinity at 60 ppm, calcium at 270 ppm, and CYA at 40 ppm before corrections were made.

Corrective measures for Day 14 included:

* 1.25 quarts of chlorine
* 1.25 quarts of muriatic acid

The pool finish is continuing to cure nicely, and the water clarity is looking incredible as we move deeper into the startup phase. This pool was refinished with a beautiful pebble-style gunite finish, and every day of this startup process matters if you want to avoid scaling, etching, plaster dust, staining, or long-term surface issues.

Throughout this series, I’m documenting:

* Daily pool chemistry readings
* Fresh plaster startup procedures
* Water balancing techniques
* Pool equipment operation
* Pump runtime and circulation strategies
* Real-world troubleshooting
* Startup mistakes to avoid
* Chemical dosage adjustments
* Long-term pool care tips

If you’ve ever wondered what the FIRST few weeks of a newly refinished pool should actually look like, this series gives you the complete real-world process from start to finish.

Whether you have:

* a gunite pool
* plaster pool
* pebble finish
* quartz finish
* saltwater system
* variable speed pump
* new pool construction
* or a pool remodel

…these startup updates can help you protect your investment and keep your water crystal clear.

Thanks for following along with the journey — Day 14 is officially in the books!

## TIMESTAMPS

00:00 – Day 14 Pool Startup Introduction
00:42 – Today’s Pool Chemistry Readings
02:05 – Chlorine Levels Discussion
03:18 – pH and Alkalinity Analysis
05:10 – Calcium Hardness & CYA Update
06:42 – Adding Chlorine to the Pool
08:15 – Muriatic Acid Adjustments
10:02 – Water Clarity Progress Check
11:40 – Pool Surface & Finish Update
13:12 – Startup Lessons Learned
14:45 – Day 14 Final Thoughts

👍 If this video helped you, please LIKE & SUBSCRIBE for more real-world pool startup updates, DIY pool maintenance tips, and equipment walkthroughs.

💬 COMMENT BELOW:
What water chemistry issue has been the hardest part of your pool startup?

🎥 WATCH NEXT:

* Pool Startup Day 13
* Complete Pool Refinish Series
* Pool Equipment Pad Tour
* Hayward & Pentair Setup Guides

#PoolStartup #PoolRefinishing #GunitePool #PoolChemistry #PebbleFinish

* “pool startup”
* “gunite pool”
* “pool chemistry”
* “new plaster pool”
* “pool refinish”

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 12 hours ago

▲ 1 r/papa_knows_stuff

Day 13: The Pool Finally Hit PERFECT Water Chemistry

**Day 13: The Pool Finally Hit PERFECT Water Chemistry**

Test Kits I use and recommend -
https://amzn.to/4foBrtS
https://amzn.to/4tDJhDC

Fresh gunite pool startup Day 13 is here — and the water chemistry is finally dialed in! After nearly two weeks of balancing, testing, brushing, and making daily corrections, the pool is now settling into a smooth maintenance routine with stable readings and crystal-clear water.

In today’s episode, I walk through the latest water test results for this newly refinished gunite pool featuring a PMM Freestone pebble finish in Azure with Blue Treasure glass beads. I show the current chemistry readings, explain the corrections made, and discuss how startup maintenance changes once the water begins stabilizing.

Today’s readings started at:
✔️ Chlorine: 1.5 ppm
✔️ pH: 7.6
✔️ Adjustments made to bring everything back into ideal startup range

At this stage of a fresh plaster startup, consistency becomes everything. The routine shifts from major corrections to daily maintenance, brushing, circulation management, and careful monitoring to protect the finish while the surface continues curing.

If you’re starting up a new gunite pool, pebble finish pool, or fresh plaster pool, this series documents the REAL daily process — including water chemistry targets, common adjustments, startup lessons, and the exact routines I’m following during the first few weeks.

This pool was refinished with:
• PMM Freestone Series Pebble Finish – Azure
• Blue Treasure Glass Beads
• Gunite Pool Surface Refinish
• Saltwater Pool Equipment Setup

Pool owners following startup procedures, water balancing, plaster curing, and pebble finish maintenance should find this series especially helpful.

#️⃣ Topics Covered in This Video:
✔️ Fresh plaster startup process
✔️ Pool chemistry balancing
✔️ Chlorine adjustments
✔️ pH correction
✔️ Daily startup maintenance
✔️ Gunite pool care
✔️ Pebble finish startup tips
✔️ Crystal clear pool water maintenance

If you’ve been following this pool renovation journey from acid wash to refill to startup chemistry balancing, thank you for coming along for the ride!

👇 Let me know in the comments:
What was the HARDEST part of your pool startup process?

👍 If this video helped you, please LIKE, SUBSCRIBE, and SHARE to support the channel!

▶️ Watch the full pool startup series here
▶️ Check out my pool equipment walkthrough videos
▶️ More DIY pool maintenance videos coming soon

## ⏱️ Timestamps
0:00 – Day 13 Pool Startup Begins
Overview of today’s testing and startup routine.
0:54 – Chlorine Test Results
Chlorine holding steady at 3 ppm with stabilizer fully dissolved.
2:05 – pH Testing
pH checks in at 7.6 again today.
4:03 – Alkalinity Testing
Alkalinity remains stable at 70 ppm.
6:18 – Water Chemistry Summary
Only pH needs a slight correction today.
7:05 – Acid Adjustment Calculation
Using ChatGPT Pro to calculate muriatic acid dosage.
8:26 – Measuring & Adding Acid
Preparing and safely adding 2.75 pints of acid.
10:41 – Final Water Correction Complete
Only one small adjustment needed to stay in range.
12:12 – Crystal Clear Pool Update
Close-up look at the PMM Azure pebble finish with glass beads and seashells.
12:41 – Day 13 Wrap-Up
Water is stabilizing and startup routine is becoming maintenance mode.

#PoolStartup #GunitePool #PoolWaterChemistry #PebbleFinish #PoolMaintenance

* Fresh plaster startup
* Gunite pool startup
* Pool chemistry
* Pebble finish startup
* Water balancing
* DIY pool content
* Pool maintenance tutorials
* Startup chemistry troubleshooting
* Related suggested videos in your series

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 1 day ago

▲ 1 r/papa_knows_stuff

One Wrong Move Could Ruin This New Pool Finish! Day 12 Startup

**One Wrong Move Could Ruin This New Pool Finish! Day 12 Startup**

Test Kits I use and recommend -
https://amzn.to/4foBrtS
https://amzn.to/4tDJhDC

Fresh plaster startup mistakes can permanently damage a new pool finish — and today on Day 12, I had to correct rising pH levels fast before things got out of balance. Follow along as I continue the real-world startup process for my PMM Freestone Azure pebble finish with Blue Treasure glass beads and share the exact chemistry readings, adjustments, and observations from today’s water test.

In this episode of the pool startup series, I walk through today’s pool chemistry numbers including chlorine, pH, and total alkalinity while explaining why fresh plaster pools constantly push pH upward during the curing process. If you're starting up a newly plastered gunite pool, pebble pool, quartz pool, or glass bead finish, these daily adjustments are critical to protecting the surface and achieving long-term water balance.

Today’s readings started at:
• Chlorine: 2 ppm
• pH: 7.8
• Total Alkalinity: 70 ppm

After testing and adjustments, the water was corrected to:
• Chlorine: 3 ppm
• pH: 7.2
• Alkalinity unchanged at 70 ppm

This series documents the REAL daily startup process following proper fresh plaster startup methods while tracking the behavior of a brand-new PMM Freestone Azure finish with Blue Treasure glass beads. You’ll see exactly how the water changes day by day, how much chemical correction is needed, and what pool owners should expect during the first few weeks after resurfacing.

If you’re building, resurfacing, or maintaining a swimming pool, this series can help you avoid expensive startup mistakes and understand what proper water chemistry should look like during the curing phase.

Topics covered in this video include:

* Fresh plaster pool startup
* PMM Freestone Azure pebble finish
* Blue Treasure glass beads
* Pool pH correction
* Chlorine balancing
* Total alkalinity management
* New gunite pool water chemistry
* Pebble finish startup process
* Daily pool startup testing
* Pool owner maintenance tips

Whether you own a saltwater pool, gunite pool, plaster pool, or pebble finish pool, these daily updates provide real chemistry numbers and practical startup guidance from an actual ongoing startup process.

## Timestamps
00:00 – Day 12 Fresh Plaster Pool Startup
00:43 – Testing Chlorine With Taylor K-2005 Kit
02:08 – Reading Today’s Chlorine Levels
03:48 – Why Chlorine Needed Adjustment
04:02 – Testing Pool pH Levels
05:27 – pH Reading Hits 7.8
05:51 – Testing Total Alkalinity
08:06 – Alkalinity Reading Comes In At 70 ppm
09:01 – Ideal Chlorine Range During Startup
10:35 – Calculating Chlorine Adjustments
11:11 – Lowering pH From 7.8 to 7.2
12:20 – Why I Left Alkalinity Alone Today
13:20 – Preparing Chemicals For Pool Addition
14:01 – Measuring Liquid Chlorine
15:35 – Adding Chlorine To The Pool
16:40 – Measuring Muriatic Acid Safely
19:19 – Proper Acid Mixing Safety Tip
20:59 – Final Water Clarity & Pool Update
21:15 – End Of Day 12 Startup Results

👍 If this series is helping you learn about pool startup chemistry, hit LIKE and SUBSCRIBE for daily updates on this new pool finish startup journey.

💬 COMMENT BELOW:
What chemistry issue gave you the biggest headache during your pool startup?

▶️ Watch next:

* Full PMM Freestone Azure pool transformation
* Pool startup chemistry mistakes to avoid
* Daily fresh plaster startup updates
* Hayward and Pentair pool equipment setup

#poolstartup #poolchemistry #pebblepool #gunitepool #swimmingpool

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 3 days ago

▲ 1 r/papa_knows_stuff

I Pulled Up Behind This Lamborghini… Then Noticed Something INSANE

**I Pulled Up Behind This Lamborghini… Then Noticed Something INSANE**

Lambo SWAG you'll love - https://amzn.to/3RxlQhK

This Lamborghini Huracán turned heads instantly — but once I got closer, I realized there was WAY more going on with this supercar than I expected. In this video, we break down everything about this incredible Lamborghini including the exhaust setup, engine, horsepower, trim level clues, design details, estimated value, and what makes the Huracán one of the wildest modern exotic cars ever built.

From the aggressive rear diffuser to the signature quad exhaust and unmistakable LED tail lights, this Italian supercar is built to dominate the road. Whether you're a Lamborghini fan, exotic car enthusiast, or just love high-performance machines, this deep dive into the Lamborghini Huracán gives you a closer look at one of the most recognizable supercars on the planet.

We’ll also talk about:

* Lamborghini Huracán performance specs
* V10 engine sound and acceleration
* Rear-end styling details
* Possible trim/package clues
* What makes Lamborghini engineering unique
* How much a Huracán costs new vs used
* Why these cars attract massive attention everywhere they go

The Lamborghini Huracán features a naturally aspirated 5.2L V10 engine producing anywhere from roughly 570 to 640+ horsepower depending on the model variant. Combined with all-wheel drive, lightning-fast dual-clutch transmission shifts, and unmistakable Italian styling, the Huracán remains one of the most exciting supercars ever produced.

One of the standout details in this image is the aggressive rear aerodynamic design, center brake light integration, and race-inspired stance. The quad exhaust setup and rear grille area give the car an unmistakably exotic appearance that instantly separates it from ordinary sports cars.

If you love exotic cars, supercars, Lamborghinis, Ferraris, McLarens, or high-performance automotive content, this video is for you.

👇 COMMENT BELOW:
Would you daily drive a Lamborghini Huracán if you could?

👍 If you enjoy exotic car content, be sure to LIKE, SUBSCRIBE, and turn on notifications so you never miss future videos.

🎥 Watch next:

* Exotic Car Spotting Videos
* Supercar Exhaust Reactions
* Lamborghini vs Ferrari Comparisons
* Best V10 Engine Sounds Ever

## ⏱️ TIMESTAMPS

00:00 – Spotted a Lamborghini Huracán in Traffic
00:08 – First Look at the Aggressive Rear Design
00:20 – Quad Exhaust & Supercar Styling Details
00:36 – Lamborghini Huracán LED Tail Light Breakdown
00:52 – What Engine Is in This Lamborghini?
01:10 – Huracán V10 Performance & Horsepower Specs
01:28 – How Much Does a Lamborghini Huracán Cost?
01:45 – Why the Huracán Gets So Much Attention
02:02 – Final Thoughts on This Incredible Supercar
02:18 – Subscribe for More Exotic Car Content

#Lamborghini #Huracan #Supercar #ExoticCars #CarSpotting

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 3 days ago

▲ 1 r/papa_knows_stuff

Day 11… I Think My New Pool Water Is FINALLY Perfect

**Day 11… I Think My New Pool Water Is FINALLY Perfect**

Test Kits I use and recommend -
https://amzn.to/4foBrtS
https://amzn.to/4tDJhDC

After 11 days of nonstop monitoring, testing, balancing, brushing, and running the system 24/7… I think this newly refinished gunite pool is finally getting dialed in perfectly. Today I go over the latest pool chemistry readings, the adjustments I made, and why keeping your water balanced during a fresh plaster startup is absolutely critical.

This pool was refinished with a beautiful pebble finish and glass beads, so protecting the surface during startup is one of the most important parts of the entire project. In today’s update, I share the current chlorine, pH, and alkalinity readings, explain why I adjusted them, and show how the water is responding as the curing process continues.

Current readings before adjustment:
• Chlorine: 1.5 ppm
• pH: 7.6
• Alkalinity: 60 ppm

I also discuss why I’m still running the filter system 24 hours a day at 2500 RPM and what signs tell me the water chemistry is finally stabilizing. If you’re going through a new pool plaster startup, pebble finish startup, or glass bead finish curing process, this series may help you avoid expensive mistakes and surface damage.

Throughout this startup journey I’ve been following recommended startup procedures while documenting the real-world results day by day. Whether you have a gunite pool, saltwater pool, pebble finish, quartz finish, or newly plastered swimming pool, proper water balance during the first 30 days is critical.

Topics covered in this video include:

* Fresh plaster startup chemistry
* Pebble pool startup process
* Proper chlorine levels for new plaster
* pH control during startup
* Alkalinity adjustments
* Variable speed pump runtime recommendations
* 24/7 pool circulation during curing
* Filter operation during startup
* Water clarity improvements
* Glass bead pool finish care

If you’re restoring or refinishing your own swimming pool, follow along with this full startup series as I document every adjustment, lesson learned, and chemistry change in real time.

👇 Let me know in the comments:
How long did it take YOUR pool water to stabilize after a fresh plaster or pebble finish startup?

#️⃣ TIMESTAMPS
00:00 – Day 11 Pool Startup & Water Chemistry Update
01:03 – Testing Chlorine & pH Levels
02:47 – Chlorine Readings Explained & Adjustments Planned
03:41 – pH Results & Why Fresh Plaster Changes Water Chemistry
04:31 – Testing Total Alkalinity With Taylor K-2005 Kit
06:25 – Alkalinity Results & Startup Balancing Discussion
08:13 – Pool Chemistry Review & Using ChatGPT To Calculate Dosages
10:07 – Adding Liquid Chlorine To Reach 3 PPM
13:02 – Lowering pH & Adjusting Alkalinity
16:08 – Adding Acid Safely During Pool Startup
17:22 – Crystal Clear Water Update & Day 11 Closing Thoughts

👍 If this video helped you, please LIKE, SUBSCRIBE, and follow the full pool startup series.

🎥 Related videos:

* Day 1 Fresh Plaster Startup
* How I Balance Pool Water During Startup
* Pebble Finish Pool Refill & Water Conditioning
* Pool Equipment Setup & Pump Programming

#PoolStartup #PebblePool #PoolChemistry #GunitePool #SwimmingPool

* pool maintenance
* pool chemistry
* DIY renovation
* equipment setup videos
* “pool startup”
* “pebble finish”
* “pool chemistry”
* “gunite pool”
* “fresh plaster startup”

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 3 days ago

▲ 1 r/papa_knows_stuff

The RIGHT Way to Wire Hayward ColorLogic Pool Lights (Step-by-Step)

**The RIGHT Way to Wire Hayward ColorLogic Pool Lights (Step-by-Step)**

u/HaywardPoolProducts

If you're installing Hayward ColorLogic pool lights, this complete DIY wiring guide walks you through exactly how I wired my Hayward Low Voltage Transformer (LTBUY11300), ColorLogic Controller (LKCUS1100), and Hayward ColorLogic 12V LED pool lights (LPCUS22100) step-by-step.

All available at this link - https://amzn.to/4wHFVCg

In this video, I show the full installation process, wiring layout, electrical connections, controller setup, transformer wiring, conduit runs, and troubleshooting tips so you can safely and correctly install your own Hayward ColorLogic LED lighting system.

Whether you're building a new pool, upgrading old incandescent lights, replacing a failed pool light transformer, or adding modern LED pool lighting to your backyard oasis, this guide should help make the process much easier.

I cover:
• Hayward LTBUY11300 transformer wiring
• LKCUS1100 ColorLogic controller setup
• LPCUS22100 12V LED light installation
• Low voltage pool light wiring tips

This Hayward ColorLogic setup creates beautiful programmable LED lighting effects while keeping the installation low voltage and energy efficient. If you've been intimidated by pool light wiring, hopefully this walkthrough gives you the confidence to tackle the project yourself.

These Hayward LED pool lights are an incredible upgrade for any gunite or in-ground pool and completely transformed the nighttime look of our backyard pool area here in Rhode Island.

If you're researching:
Hayward ColorLogic installation,
Hayward pool light wiring,
pool light transformer wiring,
12 volt pool light installation,
or DIY pool electrical projects,
this video should answer many of the questions I had during my own install.

⏱ TIMESTAMPS
Chapter 1 — Project Overview & Wiring Plan
0:00 – Intro to wiring Hayward ColorLogic 12V pool lights
0:32 – Overview of transformer, controller, switch, and GFI setup
1:00 – Opening the LTBUY11300 transformer and explaining high vs low voltage sides
1:49 – Verifying power and testing circuits safely
Chapter 2 — Replacing The GFI & Planning The Circuit
2:38 – Shutting power off and confirming safe work conditions
3:07 – Removing old GFI and explaining line vs load wiring
4:07 – Installing new GFI and wiring black/white connections
6:55 – Explaining how the transformer and switch will be controlled
Chapter 3 — Running Conduit & Transformer Wiring
9:19 – Installing extension box for extra wiring space
9:53 – Measuring and running wire through conduit
11:49 – Feeding black, white, and ground wires to transformer
13:35 – Connecting low voltage pool light wiring
Chapter 4 — Wiring The Switch & Transformer
14:08 – Preparing switch wiring and hot-side connections
16:27 – Connecting switch to GFI and transformer
18:22 – Explaining how the switch interrupts the hot leg
19:54 – Completing neutral and load-side connections
Chapter 5 — Low Voltage Pool Light Connections
21:22 – Repairing cut low-voltage pool light wires
23:40 – Preparing additional low voltage wire runs
26:04 – Feeding low voltage wiring through conduit
30:31 – Splicing multiple pool light wires together
35:34 – Finishing wire nut connections for 12V lighting circuit
37:03 – First major wiring section completed
Chapter 6 — Wiring The ColorLogic Controller
41:24 – Beginning controller wiring and programming setup
43:14 – Connecting black, white, and snubber wiring
44:43 – Reviewing Hayward wiring diagram
46:11 – Running black, white, ground, and simulated red wire
50:31 – Final controller wiring connections
53:42 – Installing the snubber to prevent GFI trips
56:05 – Wiring controller switch connections
59:18 – Creating simulated red switch wire
Chapter 7 — Final Assembly & Wrap-Up
1:02:21 – Completing final 12V switching connections
1:03:30 – Tucking and organizing all wiring
1:05:40 – Explaining high voltage vs low voltage sections
1:06:15 – Installing transformer cover and final assembly
1:10:36 – Final explanation of full wiring flow and operation
1:10:57 – Closing thoughts and DIY recap

👍 If this video helped you, please hit LIKE and SUBSCRIBE for more pool remodel videos, DIY tutorials, product reviews, and backyard project content.

💬 COMMENT BELOW:
Would you install your own pool lighting system or hire an electrician?

Thanks for watching and following along with the pool renovation journey!

#Hayward #PoolLights #DIYPool

►►Shop my Amazon Store - https://www.amazon.com/shop/papaknowsstuff
►►Any business inquires can be sent to: phjohnson@outlook.com

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm

As an Amazon Associate and eBay Partner I earn from qualifying purchases. Clicking a link to eBay or Amazon may result in a referral commission being paid to us.

youtube.com

u/History_Recolored — 5 days ago

▲ 1 r/papa_knows_stuff

I Tried the Scrub Daddy Grill Cleaner… The Results Shocked Me

**I Tried the Scrub Daddy Grill Cleaner… The Results Shocked Me**

You can get one here - https://amzn.to/4tLGpUZ

Ever wonder if the Scrub Daddy grill cleaner is actually worth buying… or if it’s just another overhyped gadget? In this video, I put it to the test on a real dirty grill so you can see exactly what happens before you spend your money.

If you’ve been looking for the best way to clean grill grates, remove baked-on grease, or restore your BBQ grill without destroying the surface, this hands-on test may surprise you. I wanted to know if the Scrub Daddy grill scrubber could really cut through stubborn grime the way the commercials claim — and the results definitely gave me something to talk about.

In this video, I show:

* How the Scrub Daddy grill cleaner works
* Real-world before-and-after results
* How much effort it actually takes
* Whether it damages the grill surface
* If it’s worth the money
* My honest opinion after testing it

This is not a sponsored review. I bought it, tested it, and filmed the results exactly as they happened so you can decide for yourself if this grill cleaning tool belongs in your BBQ setup.

If you enjoy DIY testing videos, product reviews, home hacks, grilling tips, tool demonstrations, and honest real-world product tests, you’re in the right place. On this channel I test products the way real people actually use them — no fluff, no fake demonstrations, just genuine results.

Whether you’re getting your grill ready for summer BBQ season, cleaning up after heavy grilling, or searching for easier grill maintenance tips, this video should help you decide if the Scrub Daddy grill scrubber is worth adding to your cleaning routine.

🔥 Let me know in the comments:
Would YOU use this grill cleaner after seeing the results?

👇 RELATED VIDEOS YOU MAY ENJOY:

* Pool & backyard projects
* DIY home improvement tests
* Tool reviews
* Product comparison videos
* Outdoor maintenance tips

⏱️ TIMESTAMPS
00:00 – Scrub Daddy Grill Cleaner Test Begins
00:08 – Dirty Grill Grates Before Cleaning
00:20 – First Pass Shockingly Removes Grease
00:34 – Brand New Scrub Daddy Grill Brush Close-Up
00:57 – Grime Starts Falling Right Off
01:05 – I Honestly Didn’t Think This Would Work
01:23 – Ice Water Trick Explained
01:46 – Fast Cleaning Test Continues
01:55 – Trying the Top Grill Rack
02:05 – Burned-On Residue Comes Off Easily
02:11 – Cleanest This Grill Has Been in Years
02:17 – Final Before & After Results / Verdict

👍 If this video helped you, please LIKE & SUBSCRIBE for more honest product tests and DIY reviews.

🔔 Turn on notifications so you don’t miss upcoming reviews, pool projects, tool tests, and backyard improvement videos.

#ScrubDaddy #GrillCleaning #BBQ

* “best grill cleaner”
* “clean grill grates”
* “dirty grill cleaning”
* “bbq grill cleaner”
* Grill maintenance videos
* BBQ content
* Cleaning gadget reviews
* DIY product testing audiences

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 5 days ago

▲ 1 r/papa_knows_stuff

One Bad Water Reading Can RUIN a New Pool Finish… Day 9 Results

**One Bad Water Reading Can RUIN a New Pool Finish… Day 9 Results**

Test Kits I use and recommend -
https://amzn.to/4foBrtS
https://amzn.to/4tDJhDC

Day 9 of my newly plastered gunite pool startup is here, and today’s water chemistry readings could make or break the curing process of this brand-new PMM Freestone pebble finish in Azure with Blue Treasure glass beads and seashells. If you’re starting up a freshly plastered pool, this series shows exactly what happens day by day so you can avoid costly mistakes and protect your finish from scaling, etching, discoloration, or improper curing.

In today’s update, I test and review the pool water chemistry including chlorine, alkalinity, pH, calcium hardness, and cyanuric acid levels while explaining why each number matters during the critical first 30 days of a new plaster startup. This is real-world pool startup conditioning using National Plaster Council startup principles and practical experience from an actual gunite pool remodel.

Today’s readings:
• Chlorine: 5 ppm
• Total Alkalinity: 80 ppm
• pH: 7.0
• Calcium Hardness: 230 ppm
• CYA/Stabilizer: 40 ppm

This PMM Freestone Azure finish with Blue Treasure glass beads continues to change appearance as the water chemistry stabilizes and the finish cures. Throughout this startup journey, I’ll show the daily maintenance, brushing routines, chemical adjustments, pump operation, and water balancing process needed to help a fresh pebble finish cure properly and look incredible for years to come.

If you’re installing a pebble finish pool, replastering a gunite pool, or trying to learn proper startup chemistry, this series can help you understand:
• Proper chlorine levels during startup
• How to manage pH drift
• Calcium hardness targets for fresh plaster
• CYA timing and stabilization
• Brushing and circulation tips
• How startup chemistry affects long-term finish durability
• Common pool startup mistakes to avoid

This pool was refinished with:
• PMM Freestone Pebble Finish – Azure
• Blue Treasure Glass Beads
• Added Seashell Aggregate
• Saltwater System Equipment
• Pentair Variable Speed Pump

Thanks for following along on this pool transformation journey here in Rhode Island. Watching the water clear, the finish cure, and the color deepen each day has been incredible.

⏱️ TIMESTAMPS
00:00 – Day 9 Pool Startup Update & Crystal Clear Water
00:46 – Reviewing Yesterday’s Chemistry Numbers
01:24 – Today’s Testing Plan: Chlorine & pH Only
02:03 – Performing the Chlorine Test
03:25 – Chlorine Reading Comes in High (5–10 ppm)
04:06 – Decision: No Chlorine Added Today
05:04 – Why pH Is Critical During Startup
05:18 – Nervous About Doing the Startup Yourself
06:27 – pH Reading Drops to 7.0
06:44 – Should pH Increaser Be Added?
07:28 – ChatGPT Pro Recommendation Explained
08:11 – Adding Soda Ash the Safe Way
08:29 – Why Low pH Can Damage Fresh Plaster
08:40 – Mixing pH Increaser in a Bucket
11:35 – Product Fully Dissolved & Added
12:13 – Final Water Chemistry Summary
12:47 – Day 9 Wrap-Up & Looking Ahead to Day 28

👍 If this video helped you, please LIKE and SUBSCRIBE for more pool startup updates, DIY pool care tips, equipment reviews, and backyard project videos.

💬 COMMENT BELOW:
What water chemistry issue gave you the most trouble during your pool startup?

▶️ Watch Next:
• New Pool Plaster Startup Series
• Pebble Pool Finish Transformation
• Pool Equipment and Chemistry Tutorials
• Pentair VS Pump Programming Videos

#PoolStartup #PebblePool #GunitePool #PoolPlaster #PoolChemistry

* pool startup
* new plaster pool
* pebble finish startup
* pool chemistry
* PMM Freestone Azure
* gunite pool
* calcium hardness
* pH balancing
* chlorine startup

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 5 days ago

▲ 1 r/papa_knows_stuff

These Water Numbers Could Save Your New Pool Finish | Day 8 Startup

**These Water Numbers Could Save Your New Pool Finish | Day 8 Startup**

The water chemistry is finally starting to lock in on Day 8 of this brand-new gunite pool startup! Today I test and balance the pool water while tracking the curing process of this beautiful PMM Pebble Finish in Azure with Blue Treasure glass beads.

Fresh plaster startup water chemistry is one of the most important stages of a new swimming pool finish, and in this video I share the actual test readings, adjustments, and conditioning process I’m using to protect the surface during the critical first 30 days.

Today’s pool chemistry readings:
✅ Chlorine: 2.5 ppm
✅ pH: 7.2
✅ Total Alkalinity: 80 ppm
✅ Calcium Hardness: 230 ppm
✅ Cyanuric Acid (CYA): 40 ppm

These numbers are finally getting very close to ideal startup conditions for a newly refinished gunite pool with a pebble finish and glass bead additive system. Maintaining balanced water during this phase helps prevent plaster dust issues, scaling, etching, discoloration, and long-term finish damage.

This pool was refinished using PMM Marbleite Freestone Series Azure with Blue Treasure glass beads and seashell additives for extra brilliance and sparkle. Throughout this startup series, I’m documenting the real-world process day by day so viewers can follow along and compare their own pool startup journey.

In this Day 8 update, we cover:

* Current water chemistry readings
* Why pH control matters during startup
* Maintaining proper chlorine levels
* Calcium hardness progress
* CYA stabilization discussion
* Water clarity improvements
* Pebble finish curing observations
* Pool brushing and conditioning
* Startup maintenance routines
* Real-world DIY pool owner tips

If you recently replastered your pool, installed a pebble finish, or are managing a new gunite pool startup, these videos can help you understand what to expect during the curing process and how important balanced water chemistry really is.

One of the most satisfying parts of this project is watching the Azure finish continue to evolve as the water clears and the glass beads begin reflecting sunlight throughout the pool. Every day the finish looks a little better.

Thanks for following along on this pool remodel and startup journey!

👇 COMMENT BELOW:
What has been the hardest part of YOUR pool startup or pool maintenance experience?

👍 If you enjoy pool renovation and startup content:

* Like this video
* Subscribe for upcoming startup updates
* Turn on notifications so you don’t miss Day 9

🎥 WATCH NEXT:

* Fresh Plaster Startup Chemistry Guide
* PMM Pebble Finish Reveal
* Pentair Pool Equipment Setup
* Pool Water Balancing Explained

⏱ TIMESTAMPS
00:00 – Day 8 Pool Startup Begins
Overview of today’s water conditioning and chemistry goals.
00:44 – Current Water Appearance Update
Quick look at the clarity and color progress of the Azure finish.
01:33 – Alkalinity Test Results
Testing total alkalinity and confirming 80 ppm.
02:47 – Calcium Hardness Testing
Step-by-step calcium hardness test procedure.
03:14 – Chlorine & Water Prep Discussion
Explaining the chemistry testing process and startup balancing.
04:11 – Calcium Hardness Results
Final calcium reading lands around 230–260 ppm discussion.
07:40 – Why Calcium Matters in New Plaster
Important startup tips to protect a fresh pebble finish.
08:11 – CYA Stabilizer Test
Testing cyanuric acid levels during startup curing phase.
10:48 – Final Water Chemistry Numbers
12:00 – Why Water Testing Is Critical
Explaining how balanced chemistry protects the new finish.
12:15 – Pool Looks Beautiful on Day 8
Water clarity and finish appearance update.
12:40 – Calculating Chlorine Adjustments
Using liquid chlorine to maintain proper startup levels.
15:10 – Why Powdered Shock Is Avoided
Preventing metal staining during startup.
17:21 – pH Adjustment & Acid Addition
Adding muriatic acid to maintain startup balance.
21:35 – PMM Azure Pebble Finish Close-Ups
Detailed look at the Azure finish, Blue Treasure glass beads, and tile inlays.
22:30 – Final Thoughts & Day 9 Preview
Wrap-up and next startup update teaser.

#poolstartup #gunitepool #poolchemistry #pebblefinish #poolremodel

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 6 days ago

▲ 1 r/papa_knows_stuff

**Fresh Plaster Pool Startup Day 7 | Water Testing, Acid & Chlorine Bala...

**Fresh Plaster Pool Startup Day 7 | Water Testing, Acid & Chlorine Balancing**

Test Kits I use and recommend -
https://amzn.to/4foBrtS
https://amzn.to/4tDJhDC

The whole 8 month pool refinishing process videos - https://www.youtube.com/playlist?list=PLQybHO-Wt0fKnU6ujexX2IdpwC4sj8Juu

Your fresh plaster pool startup can be ruined by bad water chemistry — and Day 7 is one of the most important stages. In today’s episode, I walk you through exactly how I test my pool water, what readings I’m targeting, and how I safely balance the water using acid and chlorine during this critical startup phase.

This newly refinished gunite pool features a beautiful PMM pebble finish in Azure with Blue Treasure glass beads and seashells added for extra brilliance and sparkle. During this startup process, I’m carefully following recommended fresh plaster startup procedures to help protect the finish, avoid scaling, prevent staining, and achieve the best possible long-term water quality.

In this video you’ll learn:

* How to test pool water during a fresh plaster startup
* The ideal chlorine, pH, alkalinity, calcium, and stabilizer ranges
* Why balancing pool chemistry too aggressively can damage new plaster
* How much acid and chlorine I’m adding today
* Real-world pool startup chemistry examples
* How the water is progressing on Day 7
* What to watch out for during the first 30 days

I also show today’s actual pool water test readings and explain why each adjustment matters during the curing process. If you’re starting up a newly plastered pool, pebble finish pool, gunite pool, or saltwater-ready pool, this series should help you avoid expensive mistakes.

This startup series follows my real backyard pool remodel here in Rhode Island and documents the daily chemistry adjustments, brushing, filtration, circulation, and overall conditioning process step-by-step.

The finish on this pool is:

* PMM Freestone Series Azure
* Blue Treasure glass beads
* Decorative seashell aggregate
* Freshly refinished gunite pool surface

Whether you’re using Taylor test kits, liquid chlorine, muriatic acid, or balancing a brand-new plaster pool for the first time, these videos are designed to help make the process easier and safer.

👇 Let me know in the comments:
What chemistry levels are YOU seeing during your startup? Have you ever dealt with scaling, plaster dust, or cloudy water during a fresh pool startup?

👍 If this video helps you, please LIKE, SUBSCRIBE, and SHARE to help support the channel!

▶️ Watch next:

* Fresh Plaster Pool Startup Playlist
* Pool Chemistry Testing Tutorials
* Pentair VS Pump Programming Guide
* Pool Equipment Pad Walkthrough

⏱️ TIMESTAMPS
00:00 – Day 7 Fresh Plaster Pool Startup
00:30 – Testing Chlorine Levels
01:36 – Why Chlorine Is Still Reading Low
02:31 – Testing Pool pH Levels
04:20 – Checking Total Alkalinity
06:30 – Calcium Hardness Test Explained
08:23 – Yesterday’s Calcium Adjustment Results
11:45 – Final Calcium Reading: 230 PPM
12:17 – Why I’m NOT Testing CYA Yet
13:20 – Calculating Acid Dosage
13:53 – Calculating Liquid Chlorine Amount
14:52 – Safely Measuring Muriatic Acid
16:24 – Adding Acid Into the Pool
18:24 – Measuring 12.5% Liquid Chlorine
20:13 – Adding Chlorine Around the Pool
22:16 – Day 7 Startup Water Update
22:45 – Checking Dissolving Stabilizer (CYA)
24:24 – Why CYA Testing Must Wait
24:33 – Fresh Plaster Pool Progress Update

#poolstartup #poolchemistry #freshplaster #gunitepool #poolmaintenance

* pool startup
* fresh plaster startup
* pool chemistry
* pebble finish pool
* balancing pool water
* gunite pool startup
* Day 1–30 startup videos
* pool equipment videos
* Pentair programming videos
* plaster finish updates
* “DAY 7 WATER TEST!”
* “DON’T MESS THIS UP”
* “POOL STARTUP UPDATE”
* “CHEMISTRY CHECK!”
* “PH TOO HIGH?”

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 7 days ago

▲ 1 r/papa_knows_stuff

**Spring Comes to Life | 2-Month Time Lapse of Trees, Grass & Cherry Blo...

**Spring Comes to Life | 2-Month Time Lapse of Trees, Grass & Cherry Blossoms**

Time Lapse Gear used in this video -
Dsoon TL3000 4K - https://amzn.to/4mZTruJ
Dsoon TL2000 1080p - https://amzn.to/47mZa9r
Camera Mounts Used - https://amzn.to/49vyoNB

Spring arrives slowly… then suddenly everything changes. 🌸 Watch trees wake up, cherry blossoms explode with color, grass turn deep green, and nature completely transform in this incredible long-term outdoor time lapse filmed from March through May.

This spring time lapse captures the beauty of seasonal change as winter fades away and life returns day by day. From bare trees to full green leaves, blooming cherry blossoms, growing grass, changing skies, and shifting weather, this video shows what our eyes often miss in real time.

If you love nature videos, relaxing scenery, weather transformations, seasonal photography, outdoor cinematography, or satisfying time lapse footage, this is for you. Watching spring arrive frame by frame is both calming and fascinating.

Filmed continuously over nearly two months, this project documents the amazing transition from late winter into full spring. You’ll see:

* Trees leafing out
* Cherry blossoms bloom and fade
* Grass rapidly greening up
* Changing light and skies
* The landscape fully awaken

Nature changes faster than most people realize — and time lapse footage reveals just how dramatic that transformation really is.

Whether you enjoy cinematic nature videos, relaxing background visuals, or simply appreciate the beauty of the seasons, this spring transformation time lapse delivers a unique perspective you normally never get to see.

If you enjoyed this video, make sure to:
👍 Like the video
💬 Comment with your favorite spring moment
🔔 Subscribe for more nature, time lapse, DIY, history, and outdoor content from Papa Knows Stuff

Thanks for watching and experiencing spring arrive one frame at a time.

#Spring #TimeLapse #Nature

## ⏱️ Optimized Timestamps
0:00 – Winter’s Final Days
0:32 – Bare Trees & Cold Morning Light
1:05 – First Signs of Spring Arrive
1:42 – Grass Begins Turning Green
2:18 – Trees Start Budding
2:54 – Warmer Days Change Everything
3:31 – Cherry Blossoms Begin to Bloom 🌸
4:10 – Spring Color Explodes Across the Yard
4:48 – Lawns Wake Up Fast
5:25 – Blossoms Reach Peak Beauty
6:02 – Nature Fully Comes Alive
6:40 – Clouds, Shadows & Changing Skies
7:18 – Trees Fill In With Fresh Leaves
7:55 – Spring Growth Accelerates Daily
8:32 – Blossoms Start Falling Away
9:05 – Full Spring Has Arrived
9:38 – Final 60-Day Transformation Reveal

“Which moment surprised you most — the cherry blossoms blooming or how fast the trees filled in? Let me know below!”

#SpringTimeLapse #NatureVideo #CherryBlossoms #SpringComes #TimeLapse

* spring time lapse
* cherry blossoms
* nature transformation
* seasonal transition
* grass growing
* blooming trees
* weather videos
* relaxing scenery
* cinematic nature footage
* seasonal transformations
* calming background visuals

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/

――――

Whatdafunk by Audionautix is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/

youtube.com

u/History_Recolored — 7 days ago

▲ 1 r/papa_knows_stuff

**This Pool Startup Mistake Can Ruin Fresh Plaster — Fix Calcium Hardnes...

**This Pool Startup Mistake Can Ruin Fresh Plaster — Fix Calcium Hardness NOW**

Source for Calcium Hardness Increaser - https://amzn.to/4uxWC1D

The whole 8 month pool refinishing process videos - https://www.youtube.com/playlist?list=PLQybHO-Wt0fKnU6ujexX2IdpwC4sj8Juu

In this video I am adding 16 pounds of calcium to take my pool from 180 ppm to around 220 ppm

We'll see what we end up with at the next test.

Fresh plaster pool startup is one of the MOST critical stages in protecting your new finish — and calcium hardness plays a huge role in whether your pool surface cures properly or starts developing problems early. In this video, I show you exactly how I safely raise calcium hardness in my freshly plastered gunite pool using the National Plaster Council startup method.

If you recently had your pool replastered, resurfaced, or refinished with pebble or quartz finish materials, this video can help you avoid costly startup mistakes. I walk through the process step-by-step, explain why calcium hardness matters, how much to add, how to dissolve it safely, and what levels you should aim for during the first 28 days of curing.

My pool features a fresh pebble finish with glass beads, so water chemistry management is absolutely critical right now. Too little calcium can aggressively pull minerals from new plaster surfaces, while too much can create scaling and curing problems. I’ll show you the exact balancing process I’m using to protect this brand-new finish.

In this video:

* How calcium hardness affects fresh plaster curing
* Why startup chemistry matters so much
* Safe ways to add calcium increaser
* Common mistakes pool owners make
* National Plaster Council startup considerations
* Pool chemistry testing and balancing
* Fresh plaster pool maintenance tips
* Calcium hardness targets for new pools
* How I’m handling startup on my newly refinished gunite pool

If you own a plaster pool, gunite pool, pebble finish pool, or are planning a pool resurfacing project, this series should help you better understand proper startup chemistry and long-term surface protection.

I’m documenting this entire pool remodel and startup process step-by-step so other pool owners can learn from both the successes and mistakes along the way.

## ⏱️ Timestamps
00:00 – Raising Calcium Hardness in a Fresh Plaster Pool
00:09 – Current Calcium Reading: 180 PPM
00:14 – Ideal Startup Calcium Levels Explained
00:19 – Adding 16 Pounds of Calcium Increaser
00:30 – Safe Mixing Method Overview
01:12 – Why You Shouldn’t Dump Calcium in One Spot
01:32 – Fully Dissolving Calcium Before Adding
01:51 – Using Conditioned Pool Water in the Bucket
01:59 – Mixing 4 Pounds of Calcium at a Time
02:06 – Preparing the Calcium Solution for the Pool
03:26 – Why the Bucket Gets Hot During Mixing
05:54 – Monitoring Water Temperature While Mixing
06:03 – Final Calcium Mixture Ready to Add
07:20 – Proper Way to Raise Pool Calcium Hardness Safely

👍 If this video helped you, please LIKE and SUBSCRIBE for more pool remodel updates, startup chemistry tips, DIY pool maintenance, and real-world product testing.

💬 COMMENT BELOW:
What calcium hardness level are you running in your pool right now — and have you ever dealt with startup chemistry issues after replastering?

▶️ Watch next:

* Fresh Plaster Pool Startup Series
* Pool Chemistry Basics for Beginners
* Pebble Finish Pool Remodel Updates
* Pentair VS Pump Setup & Programming

#poolstartup #poolchemistry #calciumhardness #plasterpool #gunitepool

* calcium hardness
* fresh plaster pool
* gunite pool startup
* pool chemistry
* pebble finish startup
* National Plaster Council startup

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 8 days ago

▲ 1 r/papa_knows_stuff

You Can DESTROY a Freshly Plastered Pool If You Do This WrongIMG 8924

**Fresh Plaster Pool Startup Chemistry Guide | NPC Method Step-by-Step**

Test Kits I recommend
https://amzn.to/4foBrtS
https://amzn.to/4tDJhDC

The whole 8 month pool refinishing process videos - https://www.youtube.com/playlist?list=PLQybHO-Wt0fKnU6ujexX2IdpwC4sj8Juu

Fresh plaster pool startup chemistry is one of the MOST important phases of owning a newly finished swimming pool. If you get this wrong during the first few days, you can permanently damage your plaster finish, cause scaling, discoloration, streaking, etching, or shorten the life of your pool surface. In this video, I’ll show you exactly how I’m starting up my freshly plastered gunite pool using the National Plaster Council (NPC) startup method.

Whether you have a pebble finish, quartz finish, Marcite, Diamond Brite, Marbleite, or traditional plaster, these startup chemistry steps are critical. I’ll walk you through the water testing process, balancing pH, alkalinity, calcium hardness, stabilizer (CYA), chlorine levels, pump runtime, brushing schedule, and the mistakes you absolutely must avoid during the first 30 days.

This is real-world pool startup chemistry from an actual freshly plastered pool project — not just theory. I’ll explain what I’m doing, why I’m doing it, and how these adjustments help protect the plaster while the surface cures properly.

In this video:
✔️ Fresh plaster pool startup chemistry
✔️ National Plaster Council startup method
✔️ How to balance new pool water
✔️ Proper pH control for fresh plaster
✔️ Calcium hardness adjustment
✔️ Total alkalinity balancing
✔️ When to add chlorine and stabilizer
✔️ Pool brushing schedule
✔️ Pentair VS pump startup settings
✔️ Common new plaster mistakes to avoid

If you recently refinished your swimming pool, had new plaster installed, or are planning a gunite pool renovation, this video can help you avoid expensive startup mistakes and keep your water crystal clear during the curing process.

I’m documenting the entire startup process on my Rhode Island pool remodel project including:

* Pebble plaster startup
* Glass bead finish curing
* Pool chemistry balancing
* Equipment setup
* Water conditioning
* Startup troubleshooting
* NPC startup compliance

💬 COMMENT BELOW:
What type of pool finish do you have? Pebble, quartz, Marcite, Diamond Brite, or something else?

👍 If this video helps you, please LIKE, SUBSCRIBE, and SHARE it with another pool owner who may be going through a plaster startup right now.

🎥 RELATED VIDEOS:
➡️ Pool Refinish Series
➡️ Pentair VS Pump Setup
➡️ Pool Water Chemistry Basics
➡️ Fresh Plaster Pool Brushing Guide
➡️ Pool Startup Day-by-Day Updates

⏱️ TIMESTAMPS
00:00 – Fresh Plaster Pool Startup Begins
00:32 – Why New Pool Chemistry Matters
01:28 – National Plaster Council Startup Method
02:40 – Testing Fresh Fill Water
04:05 – Adjusting Total Alkalinity
05:42 – Lowering pH the Right Way
07:18 – Calcium Hardness Targets Explained
08:55 – When to Add Stabilizer (CYA)
10:14 – Safe Chlorine Levels for Fresh Plaster
11:38 – Pentair VS Pump Startup Settings
13:02 – Daily Brushing Requirements
14:36 – Biggest Startup Mistakes to Avoid
16:05 – Water Recheck & Fine Tuning
17:18 – Final Tips for Protecting New Plaster

#PoolStartup #PoolChemistry #FreshPlasterPool #GunitePool #PoolPlaster

* Pool brushing videos
* Pump programming videos
* Water balancing videos
* Pool remodel updates
* Pool maintenance tutorials

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 8 days ago

▲ 1 r/papa_knows_stuff

Ring Camera Caught 2 Strange Orbs at 4:15AM – Insects or Spirits?

**Ring Camera Caught 2 Strange Orbs at 4:15AM – Insects or Spirits?**

Camera in this video - https://amzn.to/4foO3RM

At 4:15AM my Ring camera suddenly triggered a motion alert inside my garage… and what showed up on the footage honestly caught me off guard. Two glowing objects appeared moving through the frame, and now I’m trying to figure out what they actually are. Are these just insects reflecting infrared light… or something much stranger?

In this late-night Ring camera footage, you’ll see exactly what woke me up and caused the motion notification alert. I’ve watched the clip over and over, slowed it down, zoomed in, and I still can’t fully explain it. Some people believe these floating lights are dust particles, bugs, or camera artifacts caused by infrared night vision. Others believe they could be paranormal spirit orbs or unexplained energy.

I’ll let YOU decide.

This video is perfect for anyone interested in:

* Ring camera mysteries
* paranormal footage
* spirit orb sightings
* unexplained garage camera footage
* security camera motion alerts
* ghost orb debates
* infrared camera anomalies
* creepy late-night videos
* strange things caught on camera

One thing that makes this footage unusual is the movement pattern. The objects don’t seem to behave exactly like typical insects flying close to the lens, especially given the timing and motion detection response from the Ring system. Could this simply be bugs triggering the infrared sensor… or is there another explanation?

Watch closely and let me know your theory in the comments.

Do you think these are:
👻 Spirit orbs?
🪰 Insects?
💨 Dust reflections?
📹 Infrared camera artifacts?
❓Something else entirely?

The debate around Ring camera paranormal footage has exploded online over the last few years, and videos like this continue to spark discussion among skeptics and believers alike. Whether you’re into ghost hunting, security camera analysis, unexplained phenomena, or simply weird things caught on video, this footage is definitely worth a closer look.

If you enjoy strange camera footage, late-night mysteries, creepy Ring alerts, and unexplained videos caught on home security cameras, make sure to subscribe because I’ve got more unusual footage and real-life moments coming soon.

👇 COMMENT BELOW:
What do YOU think this really is?

And if you’ve ever captured anything strange on your own Ring camera, tell your story in the comments too.

🎥 Related videos you may enjoy:

* Strange Things Caught on Ring Cameras
* Creepy Motion Alerts Explained
* Paranormal Footage Analysis
* Security Camera Mysteries

⏱️ TIMESTAMPS:
00:00 – Ring Camera Motion Alert at 4:15AM
00:12 – First Orb Appears in Garage
00:16 – Second Glowing Object Enters Frame

👍 Like the video if this creeped you out
🔔 Subscribe for more strange footage and real-life mysteries
💬 Comment your theory below

#RingCamera #Paranormal #SpiritOrbs #CaughtOnCamera #GhostFootage

* ghost footage
* creepy TikTok compilations
* Ring camera mysteries
* unexplained phenomena videos

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 8 days ago

▲ 1 r/papa_knows_stuff

STOP Cabinet Doors From Flying Open! Easy $10 Fix Anyone Can Install

**STOP Cabinet Doors From Flying Open! Easy $10 Fix Anyone Can Install**

Amazon product - https://amzn.to/3VaeMoG

* cabinet doors popping open
* magnetic cabinet catch
* cabinet door fix
* cabinet latch install

Cabinet doors that keep popping open can drive anyone crazy — especially in kitchens, bathrooms, RVs, and older cabinets. In this video, I test and install the Mousike Magnetic Door Catch to see if this simple upgrade actually fixes the problem for good.

If your cabinet doors won’t stay shut, keep opening by themselves, or have weak latches, this easy DIY cabinet repair might be exactly what you need. I’ll walk you through the installation step-by-step, show the tools I used, and demonstrate how strong these magnetic catches really are after installation.

This magnetic cabinet catch install is beginner-friendly and takes only a few minutes with basic tools. Whether you’re dealing with warped cabinet doors, worn-out hardware, loose hinges, or cabinets that constantly swing open, this inexpensive solution may save you from replacing expensive cabinet hardware.

In this video:

* Installing the Mousike magnetic cabinet door catch
* Fixing cabinet doors that won’t stay closed
* Easy DIY kitchen cabinet repair
* Cabinet hardware upgrade ideas
* Magnetic latch strength test
* Quick cabinet organization improvement
* Beginner-friendly home improvement project

These magnetic catches are especially useful for:

* Kitchen cabinets
* Bathroom cabinets
* Pantry doors
* RV cabinets
* Garage storage cabinets
* Laundry room cabinets

One thing I really liked about this install was how fast and simple it was. You don’t need advanced DIY skills, and the improvement is immediate once the catch is aligned properly. If you’ve been frustrated by cabinet doors constantly opening on their own, this might be one of the easiest home fixes you’ll ever do.

If you enjoy DIY home improvement videos, product reviews, tool reviews, cabinet repair tips, and simple household fixes, make sure to subscribe for more real-world projects and honest reviews.

👇 Let me know in the comments:
Have you ever dealt with cabinet doors that refuse to stay closed? Did magnetic catches solve the problem for you?

#️⃣ Suggested Related Videos:

* Easy Cabinet Hinge Repairs
* DIY Kitchen Cabinet Fixes
* Home Improvement Product Reviews
* Simple Household Repairs Anyone Can Do

⏱️ TIMESTAMPS
00:00 – Cabinet Doors Keep Popping Open
00:18 – The Cabinet That Wouldn’t Stay Shut
00:33 – Why The Slide-Out Spice Rack Failed
00:49 – Mousike Magnetic Door Catch Review
01:06 – What Comes In The Amazon Kit
01:23 – Strong 3M Adhesive Explained
01:46 – Why This Magnetic Catch Should Last
02:02 – Ready For Installation & Final Thoughts

👍 If this video helped you, please LIKE, SUBSCRIBE, and SHARE it with someone dealing with annoying cabinet doors!

#DIY #HomeImprovement #CabinetRepair #KitchenDIY #MagneticDoorCatch

* DIY tutorials
* Home improvement fixes
* Product installations
* Problem-solving content

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 9 days ago

▲ 2 r/pools

New plaster care

It’s day five now and I’ve done everything by the book. Water is dialed in now. Chlorine 2 ppm Ph 7.2. Alkaline 80. Calcium 180 and cya 30. Been brushing one to two Times a day and there is just about zero plaster dust. My filter hasn’t even gone up 1 psi yet. Been running the pump at 2500 rpm continuously.

They must have done a good job power washing it

reddit.com

u/History_Recolored — 9 days ago

▲ 3 r/swimmingpools

New plaster update

They must have done a good job power washing it

reddit.com

u/History_Recolored — 9 days ago

▲ 1 r/papa_knows_stuff

This Might Be the Most Beautiful Carousel Ride Disney Ever Created

**This Might Be the Most Beautiful Carousel Ride Disney Ever Created**

All about Disney - https://amzn.to/42vX5Fa

Have you ever seen a Disney carousel ride so stunning that it completely stops you in your tracks? This magical Disney attraction might honestly be one of the most beautiful carousel experiences ever created — and the details are unbelievable in 4K.

In this video, we take a closer look at an incredible Disney carousel ride packed with lights, music, motion, colors, and classic Disney magic. Whether you're a lifelong Disney fan, theme park enthusiast, or someone who simply appreciates beautiful attractions, this ride experience is something special.

From the ornate craftsmanship to the atmosphere surrounding the attraction, this carousel captures the timeless feeling that makes Disney parks unforgettable. The music, movement, and visual design combine into a relaxing but mesmerizing experience that feels almost cinematic.

If you love Disney rides, Disney parks, classic attractions, carousel rides, fantasy-themed experiences, or immersive theme park environments, you’ll definitely enjoy this video. Fans of Disneyland, Walt Disney World, Magic Kingdom attractions, vintage carousel rides, and Disney Imagineering will appreciate the incredible detail and nostalgic atmosphere captured here.

This video was filmed in high-quality 4K to fully showcase the lighting, ride motion, decorative artwork, and magical ambiance that make this Disney carousel stand out from ordinary rides. Some viewers may even consider this one of the best carousel rides ever built.

🎠 What makes this ride so special?

* Stunning visual design
* Beautiful nighttime atmosphere
* Classic Disney magic
* Relaxing but immersive experience
* Incredible attention to detail
* Perfect family-friendly attraction

If you enjoy theme park videos, Disney attractions, ride-through experiences, amusement park cinematography, or relaxing immersive content, make sure to watch until the end and let us know your thoughts in the comments.

👇 QUESTION FOR VIEWERS:
Do you think this is the best carousel ride in Disney history? Let us know your favorite Disney ride below.

🔔 Don’t forget to:

* Like this video
* Subscribe for more Disney and attraction content
* Turn on notifications so you never miss future uploads

🎥 Related videos you may enjoy:

* Best Disney Ride Atmospheres in 4K
* Most Relaxing Disney Attractions
* Classic Disney Attractions That Still Hold Up Today
* Disney Nighttime Ride Experiences

## ⏱️ Timestamps
00:00 – Disney Carousel First Reveal
00:05 – The Lights Look Absolutely Incredible
00:10 – Up-Close View of the Beautiful Carousel Horses
00:15 – Disney Magic in Motion
00:20 – The Atmosphere Feels Like a Dream
00:26 – Best Angles of the Ride in 4K
00:32 – Stunning Disney Nighttime Views
00:38 – Why This Might Be Disney’s Best Carousel
00:45 – The Most Beautiful Details on the Ride
00:52 – Final Spin & Magical Ending
00:58 – Would YOU Ride This?

#Disney #DisneyRide #CarouselRide #DisneyParks #ThemePark

* Disney ride searches
* Carousel attraction searches
* Theme park viewers
* Relaxing cinematic ride content

Support us by shopping at the following links -

https://amzn.to/3ZCJqu9
https://ebay.us/hl44Sm
Papa's Website - https://www.drumrater.com
Best Prices on your Music gear right here - https://www.zzounds.com/a--3986365

Our content is for educational, entertainment, and informational purposes only

youtube.com

u/History_Recolored — 10 days ago

u/History_Recolored

**I Finally Finished My Pool Lighting Wiring… And THIS Sealed It Up**

**DON’T Install Pool Lighting Without This Weatherproof Cover**

**Day 14 Pool Startup | Fresh Gunite Refinish Water Chemistry Update**

**Day 13: The Pool Finally Hit PERFECT Water Chemistry**

**One Wrong Move Could Ruin This New Pool Finish! Day 12 Startup**

**I Pulled Up Behind This Lamborghini… Then Noticed Something INSANE**

**Day 11… I Think My New Pool Water Is FINALLY Perfect**

**The RIGHT Way to Wire Hayward ColorLogic Pool Lights (Step-by-Step)**

**I Tried the Scrub Daddy Grill Cleaner… The Results Shocked Me**

**One Bad Water Reading Can RUIN a New Pool Finish… Day 9 Results**

**These Water Numbers Could Save Your New Pool Finish | Day 8 Startup**

**Fresh Plaster Pool Startup Day 7 | Water Testing, Acid &amp; Chlorine Bala...

**Spring Comes to Life | 2-Month Time Lapse of Trees, Grass &amp; Cherry Blo...

**This Pool Startup Mistake Can Ruin Fresh Plaster — Fix Calcium Hardnes...

**You Can DESTROY a Freshly Plastered Pool If You Do This Wrong**IMG 8924

**Ring Camera Caught 2 Strange Orbs at 4:15AM – Insects or Spirits?**

**STOP Cabinet Doors From Flying Open! Easy $10 Fix Anyone Can Install**

New plaster care

New plaster update

**This Might Be the Most Beautiful Carousel Ride Disney Ever Created**

I Finally Finished My Pool Lighting Wiring… And THIS Sealed It Up

DON’T Install Pool Lighting Without This Weatherproof Cover

Day 14 Pool Startup | Fresh Gunite Refinish Water Chemistry Update

Day 13: The Pool Finally Hit PERFECT Water Chemistry

One Wrong Move Could Ruin This New Pool Finish! Day 12 Startup

I Pulled Up Behind This Lamborghini… Then Noticed Something INSANE

Day 11… I Think My New Pool Water Is FINALLY Perfect

The RIGHT Way to Wire Hayward ColorLogic Pool Lights (Step-by-Step)

I Tried the Scrub Daddy Grill Cleaner… The Results Shocked Me

One Bad Water Reading Can RUIN a New Pool Finish… Day 9 Results

These Water Numbers Could Save Your New Pool Finish | Day 8 Startup

**Fresh Plaster Pool Startup Day 7 | Water Testing, Acid & Chlorine Bala...

**Spring Comes to Life | 2-Month Time Lapse of Trees, Grass & Cherry Blo...

You Can DESTROY a Freshly Plastered Pool If You Do This WrongIMG 8924

Ring Camera Caught 2 Strange Orbs at 4:15AM – Insects or Spirits?

STOP Cabinet Doors From Flying Open! Easy $10 Fix Anyone Can Install

This Might Be the Most Beautiful Carousel Ride Disney Ever Created