r/AutodeskFusion

Hi everyone, I’m new to Fusion 360 and I’m trying to round the front edges of extruded SVG text for 3D printing.

I imported an SVG, extruded it into a solid, then used Modify → Fillet. The inner edges sometimes fillet correctly, but the outer edges give the error:

“The fillet/chamfer could not be created at the requested size.”

I originally thought the Arabic SVG geometry was the problem, but I tested a normal English text SVG and got the same issue.

In the screenshot I’m only selecting one outer edge, with Tangent Chain OFF, and trying a 1.5 mm fillet, but Fusion still refuses it.

Am I missing a setting or using the wrong workflow for rounding extruded SVG/text edges? I basically want a soft rounded edge around the entire front face for a 3D-printed clock.

Screenshot attached. Thanks!

hi guys, I am having a problem. The As-built joint feature and other assembly commands are not available at the assemble menu in the toolbar. I am on the parametric design mode but still the there is no sign of the command. kindly help.