r/BIQU

I have an skr mini 3 and an ender 3 v2. The fan wires plug into terminal blocks on the stock board and there aren't enough terminal blocks on the skr. Can anyone help?

Panda Knomi support for the A2L quietly landed in a firmware update just a few days ago. I happened to spot it on GitHub, tested it, and it works. Naturally, the next step was opening OpenSCAD and making a proper A2L X motor cover for it.

A few (dozen) prototypes later, it is finished and already running on my A2L. As far as I could find, this is the first dedicated Panda Knomi X motor cover available for the A2L.

Model is up on MakerWorld now.

A2L Panda Knomi X Motor Cover ⧸ First of Its Kind
https://makerworld.com/models/3159068-a2l-panda-knomi-x-motor-cover-first-of-its-kind

Hi everyone,

​I'm running into an issue with my BIQU CryoGrip Glacier Pro Plate and could use some advice.

​When printing a single 0.2mm first layer test across the bed, I’m getting random patches of rippling / waviness / rough texture (pictures attached).

The strange thing is:

- ​It’s not happening across the entire sheet—only in specific uneven localized patches.

- ​The exact same filament and settings print a 100% perfect, smooth first layer on the stock Bambu Textured PEI plate.

​Current Setup & Details:

Printer: Bambu A1

​Plate: BIQU CryoGrip Glacier Pro

​Filament: Bambu Matte PLA

​First Layer Height: 0.2 mm

​Bed Temp: 45°C

Noozle: 215°C

First layer speed: 80

​Plate Type selected in Slicer: Cool Plate

For those who dont know, Panda Touch is a screen that provides info from your Bambu printers, but since some updates ago the screen is no longer connecting to Bambu Cloud, so it became useless.
I asked Claude to reconvert it to an office ESPhome dashboard, so now it can turn on lights and show me the printer status via Bambu integration.
Much more useful than before :)