
Hi Ace
JDM 50th aniversary GDH206, fresh off the boat
4wd and as flash as they come 😎

JDM 50th aniversary GDH206, fresh off the boat
4wd and as flash as they come 😎
Anyone swapped out the factory airbag wheel for an aftermarket wheel ?
Located in Vancouver, 1kzte and manual swap with 120k on them, after market suspension, functional camper set up(second battery, solar, 3000w inverter), comes with a good set of winter tires on original rims
rust is not too bad, tachometer inaccurate, quite some oil in engine bay, hard to spot where it’s from, and underneath around front diff. back door hatch doesn’t work.
would this be reasonable around 10k?
Sorry for the low quality images - taken from a FB Marketplace listing. Any advice would be super appreciated, even if it seems really obvious!
Hey all,
Not sure if this is the place to post but I have a 1997 Hiace with a 2RZ engine.
I was sitting for 4 years and I bought it knowing it would have a few issues. I have worked on it while learning mechanical skills, and also taken it to the mechanics.
I have got a whole carburettor rebuilt, timing adjusted, and carburettor tuned and it was running great for two weeks and then stopped working. The mechanic advised me to drop the tank because there was water and debris in the system, but when I dropped the tank, there was no rust or water in the fuel tank. I dropped the tank and drove it home fine, then the next day it wouldn't run, it started but struggled to stay idling for long.
I then noticed fuel leaking out behind the front left tyre. The charcoal filter had a massive hole in it wwhich has a vacuum line going to the engine. I fixed that today, and there was another leak in a component down near that area which I will get a replacement part for tomorrow.
I'm thinking a vacuum leak is my problem but I'm still fairly new to this, any recommendations would be great.
My 52 Yo dome light is crumbling to dust,
Does anyone know where to get a replacement or get a STL to print one ?