Hello from Florida.

Does anybody have any clue whats in these tabs? I havent seen a COA for these specifically. I'm convinced they have something more than MIT because if I take the level of MIT independently, the feeling I achieve is nowhere near what these produce.

Since the 7 ban here in FL, there's only 3 products that get me feeling great- 7stax nano, hyroxi MIT, and these straight heat tabs.

The 7stax has a COA online which confirms the presence of emgee casino. It takes over an hour to take effect and slowly fades pretry much through the whole day.

The Hyroxi MIT states it has D h m on the back, and consensus is that d h m is the same as emgee casino. Checks out because they feel remarkably similar to 7stax.

Ive tried several other MIT shelf products and none of them do nothing more than causing nausea and maybe relieve wd symptoms.

Then we have these Straight Heat. The packaging states it has MIT, and >3% of other alkaloids. I genuinely feel that theres something of value in that 3% that im not aware of. These kick in very fast--about 10-15 min., and produce a very enjoyable euphoria without much nausea--even when consuming all 4. It only lasts about 4 hours. Thhese also feel notably different than the original lower dose Straight Heat Mit tabs and the Opia Mit tabs.

I definitely prefer the 7stax and Hyroxi, but many times i reach for these, not only for a change of pace, but because the quick initial rush is much more enjoyable than an hour and a half wait.

Anybody seen a COA for these, or have any guesses as to what might be in them? Perhaps its just mit with super low dose emgee casino? I don't know.

I’m not rich, I’m very poor actually but I do have a 3D printer my buddy gave me for free. So why not use the bed of it to act as a hot plate. And I don’t use kratom anymore. But extracting kratom won’t land me in prison, like say DMT. Which I absolutely LOVE allegedly making.

Print plate was obviously moved. Paper towel is just to prevent accidents.

An air fryer with a dehydration mode would be ideal.

ALSO….Sorry.

I promise you when I’m done you will get a full PDF and I did record every step. It’s just time consuming to edit the shit. But if you have common sense, a computer, a thermometer and household items the bare instructions are below.

The guide I’ll be done with hopefully this weekend goes into specifics on why you’re doing what you’re doing. Explaining thermolysis and it does to increase yields.

Want a quick breakdown? Like now?

You’ll need:

-Kratom 30g
-Jars
-Pots
-Stove
-Airfryer would be lovely. I own a 3d printer but not an air fryer.
-5% Vinegar (NOT CLEANING VINEGAR.) If higher than 5% do your math and dilute.
-1.5 cups of water

You should: Sterilize all your vessels holding your solutions. Dawn dish soap to remove grease and oils, then ISO alcohol wipes to clean. Including the lids. We don’t want fermentation or mold.

First: Add your 30g of kratom to your mason jar, and add your 2.25 tablespoons of vinegar and 1.5 cups of water.

Learn more about that here and watch the video: [CLICK]
The thread has a lot of good discussion too.

1. Cap on, shake vigorously. You want zero clumps as kratom is hydrophobic. Put jar in freezer overnight.
2. Take jar out and LET THAW AT ROOM TEMP. This mason jar is going to be heated up and a crack in the glass would mean A LOT of extra work and time.
3. Once fully thawed get a pot of water on your stove and make sure it can have enough water to reach the line of the mason jar where your kratom mixture is. ‼️** ALSO: MAKE SURE YOU USE A BUFFER UNDER THE JAR**.‼️In my case a mason jar lid. You don’t want the vessel to contact the bottom of your boiling pot. A rag will work, a grate, whatever you want.

This is what the solution looks like after thawing at room temp. Airtight container, fermentation could occur but the vinegar and clean jars should prevent that.

⚠️ NEVER LET IT GET CLOSE TO 60°C, if you see it hit 50°C remove vessel and adjust boiling pot temp. Lots of trial and error, but it’s all gravy if we don’t hit 60°C

7. Once your mixture has been kept at the required temps above for 20mins turn off your boiler/stove and keep the jar in. It’ll also allow it to settle better. Once it’s back at room temp, put it in an airtight container/jar and store in a dark place. I used an empty cooler. NOTE: Don’t let that mixture sit long. Especially if you didn’t sanitize the jars and lids with say ISO. Even if you did avoid storing it long term. Keep in that environment for 24hrs and allow to settle completely.

8. The following day get your strainer and clean, preferably not cleaned with detergent. Don’t use coffee filters yet. Put a strainer into whatever vessel you have (a different one) and do a double layer T-shirt filter. Slowly pour off the top liquid. Only try to get the liquid for now.

9. I recommend letting gravity do its thing and transferring the strained liquid to that other vessel periodically between pours. Eventually you’ll get to the sediment.

10. Add just enough water to the sediment to make it a sludge and into the tshirt. Then just wring out all the liquid until that material is bone dry.

11. You should now have a jar of amber liquid. That liquid is now going to be refiltered using multiple coffee filters. This will catch plant particulate the shirt didn’t. If you use them from the start it’s possible but it clogs A LOT. I used an internal coffee pot filter with 5-7 paper filters over a measuring cup. Pour as much as you can without going over the filters. And let gravity do the rest.

Rinse repeat until your new vessel is nothing but double strained liquid.

Now you have a jar of amber liquid that is extract. You do NOT need to evaporate.

Which is a pain. You can make tinctures with it; whatever. Just make sure you’re storing it right and if liquid maybe preservatives of some sort. Pineapple juice is used a lot I’ve noticed in commercial products.

IF YOU WANT A POWDER OR RESIN….

Alternatively I’ve used heat lamps, heating pads under a casserole dish. Straight left in the hot sun. The goal is a thin layer of liquid coating as much area as possible and heating it to said temperatures until it becomes basically a crust/powder.

If you used apple cider vinegar you will get a resin like substance that’s almost like cannabis extract.

I don’t mind it, use dab pick, scoop some, lick your fingers and roll into a ball or oval to put in a capsule or whatever just eat it. Wetting your fingers prevents the resin from sticking to your fingers and making a mess.

Important Notes:

If you keep your jar post boiling or even pre boiling pay attention for any mold if you had it sitting a while. It should smell earthy and vinegary kinda. But not anything like mold.

I sanitized the cafe bustello and mason jars first using dawn dish soap then wiping down with ISO alcohol wipes. Just as a precaution. I had it sitting for almost 2 days and zero mold detection. But be on the lookout for it. Sitting for too long can also create psuedoindoxyl if conditions are right.

Yields may vary drastically. This isn’t just mitragynine extract. The temps and methods used were to get the maximum amount of alkaloids out of the plant material. Primarily there’s 4, MIT, 7-OH, and 2 that act on serotonin receptors responsible for the mood lift. PLUS we’re getting the flavonoids.

Certain veins or strains may have more or less flavonoids than others, increasing yield. We know there’s an entourage effect with kratom. That’s clear as day. Just like terpenes on their own don’t do anything, flavonoids on their own won’t either. Combine them though and you get different effects.

It probably has to do with flavonoids inhibiting certain enzymes to increase the half life or bioavailability of certain alkaloids. Resulting in higher levels of psychoactive alkaloids making it into the blood/plasma.

Before anyone asks:

Why are you doing this?

Because if you believe kratom is helping you therapeutically then you should be able to consistently get the same dose. This allows for much accurate dosing and much less side effects that may be caused by the body processing loads of plant material. This will prevent random tolerance spikes when a stronger batch comes out. We know for a fact MIT content typically is between 1.7-2.4% of the plant. BUT some have been recorded at mid 6%.

So you could be taking 5 grams per day of this plant material you’ve been taking for a while. Then a new batch comes around and you could be taking the equivalent of 20 grams worth of MIT. That is not good for you, your tolerance, or your future relationship with kratom.

I truly believe kratom is a medicine. Well can be a medicine,
or recreational. But it is an opioid and don’t let the lack of β-arrestin give you a false sense of security. It’s still active on the KOR sites which is responsible for the really unpleasant side effects or “wobbles” and on top of that G-Protein activity, responsible for the analgesic effects.

It’s almost like a miracle plant in a way. I don’t use it anymore. Nor touch any opioid agonists outside clinical settings. I can’t control my use. But Kratom has a lot of potential and I can 100% guarantee pharmaceutical companies are making mitragynine or 7-OH derivatives that deliver analgesic effects without the respiratory depression. Because we don’t really have anything like it currently.