How to do remachining after opti rough 3d toolpath I used 8 flat rough endmill but In some places 8 can't go inside so that left some stocks so I want to remachining the stock .
I can go with 3 flat endmill for full operation but it takes more time that's why Im going with 8 flat
Any toolpaths with remachining options for a after 3d toolpath kind of options?
I'm using surface Rough pocket program for Roughing . Whenever I create this toolpath if I put 1mm stepdown in the bottom the 1mm stock is still there but I'm putting .15 stock for leave on drive
How to use properly this toolpath or is any alternative toolpath for remove the excess material .
It's a production job so we need to reduce cycle time so Kindle help me to reach that .
I need .15 stock and wall and bottom but this toolpath leave nearly 1mm how to solve this ?
mastercam right and left rotation working fine but top and bottom rotation not working i think some options enabled mistakenly. Help me to reach And one more help , which is if anything mistakenly enabled then how to restart the mastercam like format something ? Or is this a mouse issue?
I don't know what my operator did . He said I enable like something mistakenly.
But recently whenever I draw a circle something like surface has been forming how to disable that .
I'm doing 3d flowline toolpath for this orange color surface.
But I convert that 3d shape to surface and extended 2.5 mm surface surface for 1 side 1mm for another side .
Then I created a flowline toolpath and select right side which means I did extend 2.5 mm as a entry side otherwise I create a toolpath without extend the tool (4 ball) the tool will be launching on a component I don't want to land or reduce the plunge rate I want to land out of the components then do machining
Any others ways to land out of components for first pass only like lead in lead out option kind of . Because long 3d components takes more time . Kindly help me to get that . I'm a fresher so make me comfortable in your space 🫣