My local Walmart recently remodelled and had these on clearance. I haven’t seen any TVC on the shelves for a while so I’m assuming they found these lying around somewhere and decided to get rid of them.
I sealed my driveway yesterday, method:
- One coat of Rustoleum epoxy shield driveway resurfacer and sealer. Which was a thick jelly-like product (water based)
- Waited approximately 3 hours and applied another thin coat of the same stuff.
- Waited another hour or two and then applied one coat of Rustoleum epoxy shield premium driveway sealer which was a thinner liquid, also water based.
Both products were applied using a roller, the first one lists a recoat and foot traffic drying time of 1 hour and car traffic drying time of 4 hours. I have also attached screenshots of both products.
The problem:
Today, approximately one day after application (when I thought the driveway must be fully cured), I was watering my lawn and got water on the driveway. I noticed some light foam on the water, so I decided to wash it off but the more I showered the driveway with water, the more foam kept forming. Eventually I ended up showering the whole driveway until it stopped foaming (about 2-3 minutes).
I am a bit worried that the driveway was not completely dry and I may have damaged the coat. The box for the second product states rain ready in 1 hour and neither of them state the dry time needed for washing.