Trouble with Slate7 Wireguard Tunnel to pfSense
Hello,
I realize this is the pfSense community and this is likely a GL.Inet issue, but im hoping somebody with a similar setup could help out. I am having one last hurdle with my remote travel setup that i just can't seem to figure out and was wondering if anybody here had any ideas.
The Plan: To be able to access my home lab while im traveling as if i had never left home.
The Setup: Home firewall runs pfsense and is acting as a wireguard server. GL.Inet Slate7 is acting as a wireguard client.
The Issue: Stateful connections from the Slate7 lan can access the home network. Stateless connections (like DNS queries for example) fail from the Slate7 lan. All connections originating from the home network to the Slate7 network fail.
On pfSense: Wireguard client shows as connected. Allowed IPs set for the Slate7 network. Static route for the Slate7 network has been set to the wireguard gateway. Firewall rules on the wireguard named tunnel are set to Allow Any Any.
On Slate7: On the VPN dashboard the wireguard client is green. On the VPN dashboard it's set so Lan network to subnet for home network is the wireguard config/tunnel. The Allowed IPs for the home network are also set in the WG config. The "Allow remote acces to Lan subnet" is checked. Also IP Masquerading is unchecked. In LuCi under the firewall section I have a entry for wgclient1 to Lan set to Accept, Accept, Accept. There is also an entry for Lan to Wan/wgclient1 set to Accept, Accept, Accept.
I really feel like this has to be a firewall block on the Slate, but i cant seem to figure what else to look for. Does anybody else have any ideas? I feel im so close.
Thanks in advance!