Please help! Configuring Seagate SAS drives on My Dell PowerEdge R730xd,
I got a great deal on some Seagate HDDs that I want to use as a RAID6 TAR backup on my file server, but I'm unable to configure them to RAID. The issue seems that they are configured to 520 byte sectors, and I need them configured to 512. The RAID controller sees them, but the OS does not. They are listed under physical disks in the controller's configuration utility and in iDRAC8, but no operations can be performed on them regardless of whether the controller is set to RAID or HBA mode (except for blinking the lights.)
As far as I know they are brand new, and have never been installed in a system before. There's no foreign configuration listed for them, either way.
I found some advice to set the controller to HBA mode and use sg3_utils to flash them to 512 byte sectors but since the OS can't identify them, neither can sg3_utils.
Operating System: Debian 13 Server (no gui)
Hardware:
System: Dell PowerEdge R730XD, Bios v. 2.19
CPUs: 2x Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz
RAM: 256 GB
RAID Controller: PERC H730P Mini (Embedded), Firmware v. 25.5.9.0001
Hard Disks: Seagate st1200mm0098
Any help is appreciated.