The notorious regulator. I replaced both drivers and passenger side, passenger side works flawlessly, however the drivers side started binding after a month. I must have removed it about a hundred times by now, when the window is disconnected the regulator moves perfectly but it binds up when the window is connected. Clips are greased, and I even shaved them down so that they slide easily. What could be the issue?
Ive been slowly trying to convert my M3 back to stock and I'm thinking of buying an M tech 2 steering wheel. I have a Momo wheel with an NRG hub right now, what does it take to add the M tech 2 wheel onto the hub?
Hi all, wondering if anyone else has come across this issue. When the interior light switch is on position one, the passenger side DRL (angel eyes/halos) works, but the driver side doesn’t. When the switch is on #2, the halos and the low beam comes on on both sides. I don’t have actual connectors, just the wires plugged into the headlights with butt connectors. I have power at all of the wires, and my fuses are good. I’m wondering if something shorted to power?
Hi all, does anyone know the part number for the AC belt for a ‘95 M3? I tried Oreilys first but the belt was too big. I’m going to order one off ECS or FCP but I’m not sure if it’ll be correct. I don’t have the secondary air pump.
Ah yes, nutritious regulator. Installed this new regulator a month ago and it was working fine until it started binding (I think). I noticed the bolts came loose so I tightened them thinking that would help but it still seems to bind. The window looks like it’s on track… am I overlooking something? Only way to roll it up completely is to pull on the window and hitting the switch at the same time, but for some reason that trick isn’t working