u/Fit-Library9917

I am getting this error when booting into my usb using OpenCore picker

i have a HP Laptop bs1xx here are the specs:

Cpu: Intel(R) Core(TM) i5-8250U (Kaby-Lake-Refresh)

iGpu: Intel Graphics UHD 620

dGpu: Amd Radeon (tm) r5 m330 (Disabled using -wegnoegpu)

RAM: 2 sticks of 4gb ddr4

MotherBoard: 832B

Ethernet: RTL8111

SMBIOS: MacBookPro14,1

Bios: Insydeh20 rev: 5.0

I followed dortania Coffee Lake guide for the efi but my SMBIOS and Device properties were set with the Kaby Lake Part of the guide because i saw another reddit post saying i should do that. I also setup the usb with a MacOs VM for a offline installer.

What I've done:

Tried leaving just Lilu, SMC, WhateverGreen, UTBmap, USBtoolbox kexts and seeing if it boots.

Followed troubleshooting steps for my error and it did not work

Disabled CFG lock using modGRUBSHELL

Added -ncpi=0x3000 boot arg

Added -no_compat_check boot arg

Bios config: I disabled Fast Boot, Secure Boot, i could not find Serial/COM port in bios, Could not find Parallel port in bios, could not find VT-d in bios, CSM is disabled, could not find Thunderbolt in bios, disabled intel SGX, could not find Intel PlatForm Trust in bios, enabled VT-x, could not find Above 4G decoding in bios, could not find Hyper Threading in bios, could not find execute disable bit in bios, could not find EHCI/XHCI hand off in bios, set os type to uefi, could not find DVMT-Pre-Allocated(iGPU Memory), could not find Sata Mode in bios

I think the reason why i am stuck on this error is because my Bios is very locked down by HP and i could not enable/disable alot of the settings required.

OpenCore Log File: https://drive.google.com/file/d/1d0DSiSiRRIRhDzsDJ7HxhKBDGn68UdLp/view