No power to outlets
My laundry room is in an addition to my house. I have three plugs in there. Two on the inside and one on the outside. At the time, my washer was the only thing plugged in. I turned the washer on hit start and the door locked, but then the display went blank. After a couple of seconds the display came back on. I tried again and the same thing happened. After trying this 2 more times with the same results, the display never came back on. I found that there was no power going to the outlet that it was plugged into or any outlet on that circuit. I checked the breaker and flipped it and still nothing. I checked to make sure power was leaving the breaker and it was. I even replaced with a good breaker and still nothing. There are no GFCI outlets and there is no junction box on the circuit. I can’t for the life of me figure this out. Any advice would be appreciate.