u/Isaacglea

1.5 seasons old stored in a garage.

Everything is plumbed to maximize flow and help not wear the machines

Includes:

* 8 GPM Pressure Washer gx630 (unknown hours) estimated 300-400 hours.
* Flow Pro Downstream Injector with 3-Way Flush Valve
* 5x10 Trailer
* 275 Gallon Water Tank
* 55 Gallon Chemical Tank
* 5 Gallon Soap Tank
* 7 GPM Remco Soft Wash System with Proportioner
* (3) 18” Titan Hose Reels
* 200’ Pressure Hose
* 200’ Soft Wash Hose
* 200’ Fill Hose
* 20” Surface Cleaner

Perfect setup for:

* House Washing
* Roof Cleaning
* Driveway & Concrete Cleaning

One of the bars broke on my ground force surface cleaner it has a 4 tip x bar wondering if there is a replacement arm or if I’ll have to buy a new bar.

84k sqr foot of 2 story vynal they want washed and 71k sqr foot of roof they want washed I priced it at $18,960 for roof and siding and $11,500 roofs only. Let me know what your price woulda been

The storage unit wants exterior of the buildings, washed of bird droppings, algae and mold abd hallways washed of bird poop. The hallways will need plastic wrapped and sandbagged probably to ensure no water gets into the storage units as there’s a gap between the ceiling and the top of the walls of the storage units and a gap from the floor and the wall of the storage units. The doors are heavily oxidized metal there is 68,200 ft.² of units and 30 hallways. The hallways are anywhere from 3 to 5 feet wide and 30 to 40 feet long. Also, there’s one house Spicket on the whole property so we will need to hook up to the nearest fire hydrant probably which is one minute up the road. How are you guys pricing this. Or should I send it to my buddy –that has 10+ years in the wash game.

Total of 15 storage units 12 of them are 4300 ft.² and three of them are 5500 ft.² some are made of oxidized, metal and some painted cinder blocks.

This is a dumpster pad that needs washed and I’m used to cleaning dumpster pads, but I have no experience washing any thing of asphalt. On top of that the grease buildup is absolutely insane and rock solid like it’s been sitting there forever. What would be your guys process to do this and what would your pricing look like?

Got this small church that I need to do we plan on soft washing the vinyl and doing the concrete, but if not too sure about l steeple if I can just soft wash it too, or I’m gonna have to soft wash and scrub it.

They want the roof washed we manly only have shingle roofs here yall charging the same for metal roofs or more/less. Process wet roof early in the morning apply chem work my way up from 2% till it works and keeping the roof wet then rinse. Or should I just dragon juice it.

I’m only using a 2800psi 8gpm machine with 24 inch surface cleaner with 25025 tips. after 3 years this is the first driveway I’ve etched and have no clue what to do any recommendations? Like go back over with small swirl motion or should I lower the psi on the unloader and go back over it