u/Ka0mon

Hi all,

Have another used, great condition, grey Empire Sniper with NO barrel.

It currently has no leaks- replaced it with a new cup seal and changed it out all the orings on the lower including the valve, IVG, and also the bolt too.  The HPR was rebuilt but the reg seat looked fine so didn’t replace that. I unfortunately don't have a chrono, but set the operating pressure to factory specs at ~220psi, and I set the IVG 2 full turns from flush (running stock internals).  Please use the link for more pictures and video of the marker.

****Click Here for More Pictures & Videos!!!!****

Aesthetics wise, has some signs of usage, so it has some wear and signs of play and I want to be as transparent as much as I can about the condition. Feedneck has a scratch one edge and also the lever. Bottom of HPR has marks/scratches. The body has minor light scratches that hasn’t gone through the anno. And the pump has not swollen yet so pretty fortunate about that. Again please refer to the link above for a more pictures and videos.

It will come with what is pictured, the marker itself only- NO barrel.

Price is $285 shipped/Paypal’d in USA only – sold as is

 

Encourage to ask for more questions, pictures, and/or clarifications if needed.

 

Hi all,

Got a no thrills, reliable stock PE Emek on the chopping block today.

Got it used and never fielded myself. I’ve only aired it up and did some drying firing and currently has no leaks- don’t know the history of any previous rebuilds. It’s completely stock (stock trigger and valve), aside from the POPS ASA.

****Click Here for More Pictures & Videos!!!****

Aesthetics wise, it’s in good shape and has signs of usage. There are some dried up paint here and there. The POPS ASA does have scratches and some nicks on it as shown in the picture and video. Barrel also has some scratches and nicks as well.

It will come with what is pictured- the marker along with the stock barrel only.

****SOLD!!**** Price is $200 shipped/Paypal’d in USA only – sold as is ****SOLD!!****

Encourage to ask for more questions, pictures, and/or clarifications if needed.

 

Hi all,

Have another used, decent shape, player’s condition black Empire Sniper.

It currently has no leaks- I replaced all the orings on the lower including the valve, IVG, and also the bolt too. The HPR was rebuilt but the reg seat looked fine so didn’t replace that. I unfortunately don't have a chrono, but set the operating pressure to factory specs at ~220psi, and I set the IVG 2 full turns from flush (running stock internals). Please use the link for more pictures and video of the marker.

****Click Here for More Pictures & Videos!!!!****

Aesthetics wise, it is again a player’s marker, so it has some wear and signs of play and I want to be as transparent as much as I can about the condition. Feedneck is scratched on one side and there are tool marks around the HPR from previous owner servicing it. The body has some nicks here and there, with anno wear from the bolt/sled area of the body. The breech has some dings as shown in the pictures, along with some marring on the ASA. The barrel .680 shows the most usage with anno wear and some scratches on it, while tip has some minor nicks it- nothing major. Again please refer to the link above for a more pictures and videos.

It will come with what is pictured, the marker itself with a 3D printed pump handle (installed), along with all three barrel backs, .675, .680, and .685,, the barrel front, and the spring feed. Also have the original pump handle but it’s swollen so it needs to be drilled out if aimed to be used.

 

****SOLD!!!**** Price is $310 shipped/Paypal’d in USA only – sold as is ****SOLD!!!!****

Encourage to ask for more questions, pictures, and/or clarifications if needed.

Reposting again, as there were a bunch of interests but eventually ghosted :/

Anyways, copied and pasted from my last listing with updated timestamps.

------------------------------------------------------------------------------------------

Hi all

Have a good condition dust black SP SFT up for grabs.

Condition: the body and frame are pretty solid with no major dings or dents. There is anno wear on the edge/transition edges of the body and frame. I changed out the original shorter VASA (non-gauge port) as it was causing the macroline fitting to rub against the frame. The current VASA does show its age with some marks and scratches throughout. Though not perfect, but overall, this is one of the nicer SFT I had my hands on lately.

****Click Here for More Videos & Pictures!!****

Solenoid clicks and vision is working.

It has no leaks – replaced all the orings except for the solenoid inserts. Will need to tune to get the optimal dwell and operating pressure (have no chrono).

Equipped with stock SFT vison board with SFT stock internals. Comes with barrel as pictured (non-Freak)

****SOLD!!!**** Price is $265 shipped/Paypal’d in USA only – sold as is ****SOLD!!!****

Encourage to ask for more questions, pictures, and/or clarifications if needed.

Hi all,

Got another used, decent shape Non-Vision Impulse up for sale.

Condition wise, it has some light dings and light scratches throughout the body and frame. There are also some white “speckles” throughout the feedneck, and the anno on the HPR does show it's wear. Only issue is that both detents' hexes are stripped so it will need to be removed/installed with a wrench instead. Aside from that, the marker overall is in fair condition considering its age. Please use the link for more pictures and video of the marker.

***Click Here for More Pictures & Videos!!*** 

It has no leaks – replaced all the orings on the hammer assembly and regulator. As the video shows, the solenoid is functioning, along with the board (dwell is functioning but one of the rubber nibs is torn/missing- does not affect functionality). Additionally, it will need to tune to get the optimal dwell and operating pressure (have no chrono).

Equipped with stock non-vison board blue cricket board, stock internals, SP Q-lock feedneck, and a SP delrin voodoo bolt. Dye sticky grips has been cut (not mushy/melting). Will come with the 16’’ J&J Ceramic 1-piece barrel as shown.

****Sold!!!**** Price is $120 shipped/Paypal’d in USA only – sold as is ****SOLD!!!****

 Encourage to ask for more questions, pictures, and/or clarifications if needed.

Also still have a great condition stock dust black SFT Shocker for sale: Dust Black SFT F/S Post HERE!!

Hi all,

Have a good condition dust black SP SFT up for grabs.

Condition: the body and frame are pretty solid with no major dings or dents. There is anno wear on the edge/transition edges of the body and frame. I changed out the original shorter VASA (non-gauge port) as it was causing the macroline fitting to rub against the frame. The current VASA does show its age with some marks and scratches throughout. Though not perfect, but overall, this is one of the nicer SFT I had my hands on lately.

****Click Here for More Videos & Pictures!!****

Solenoid clicks and vision is working.

It has no leaks – replaced all the orings except for the solenoid inserts. Will need to tune to get the optimal dwell and operating pressure (have no chrono).

Equipped with stock SFT vison board with SFT stock internals. Comes with barrel as pictured (non-Freak)

Price is $265 shipped/Paypal’d in USA only – sold as is

Encourage to ask for more questions, pictures, and/or clarifications if needed.