







Skirting Board Help - Poor Workmanship or Normal?!
I recently moved into a new build house and got a recommendation for a well known local flooring contractor to install laminate flooring downstairs and upstairs in my bedrooms.
The skirting boards were lightly tacked on by the builder so they could be removed easily, and the flooring contractor re-fitted them afterwards.
After the floors were completed,I had a painter come out to quote for caulking, painting and finishing the skirting boards. He pointed out that there were quite a few areas with large gaps, visible cracks, poor alignment and sections that didn’t sit flush. He recommended asking the flooring contractor to come back and correct the work before any painting was done.
I contacted the guy who did my floors, and he did come back to look at it. However, he said that the condition he left them in was normal and suggested that the painter probably didn’t want the job.
A few days later, a friend of a friend who is a carpenter happened to be visiting and said it was the worst re-fitting of skirting boards he had ever seen.
I’m now stuck between conflicting opinions:
- The flooring guy says the work is normal.
- The painter says it needs to be corrected before decorating.
- The carpenter says it has been poorly re-fitted.
I’m not sure whether this is genuinely within normal expectations, or whether the flooring guy should be correcting it. I also don’t want to pay someone else to redo work that should have been done properly in the first place.
I’ve attached some photos. Thoughts?
Is the condition of the skirting acceptable, and what would be the best way to resolve it?
Any advice / recommendations welcomed!