


Cycling issue
Bought a new diamond back .308 a while back and it had occasional feeding issues when I first got it. Few months go by the firing pin broke due to a faulty bolt so I replaced the bolt with a psa 10. And now I got cycling issues all the time. The first image is .308 Hornady black 168 grain and it s trying to load the next round while the spent case is leaving causing what you're seeing in the first image. The second is some cheap 7.62x51 while ejecting the casing is shearing as shown in third image and I'm assuming while the casing is coming out it swells causing it to be stuck.
Now I will say I run this rifle suppressed. However this happens either way. - just tried it again unsuppressed with the cheap 7.62 got one to cycle properly and then it jammed up again like shown.
Is this simply over gassed or cheap ammo or a combination of problems?
Update had a buddy of mine take a look at it. Definitely over gassed, ordering a gas block for it and the bolt extractor spring on the bolt is stuck. So replacing spring and gas block