Sneak peek at my first Ariculated Bakugan Action Figure, Tremblar from Mechtanium Surge Arc 2. I’m currently printing on the rest of the parts like his mine piece so he can also be in his default form. Once the parts are finished, I will be checking on the quality control, take promo images, and eventually upload the files on Cults3D. Stay tuned.
Here is a rough sketch of Kodokor from Bakugan Mechtanium Surge Arc 2. My goal is to make the Nonets into articulated action figures. Tremblar is in the final printing process and Wortons rough sketch is finished. I'm 90% done of completing Kodokors rough sketch, but I'm struggling to make the head. Hopefully, I'll be able to finish the rough sketch
After I finish with the Tremblar Figure, I will be working on Ventus Worton next. I'm planning to make the tendrils wired and make the limbs double jointed. Some parts will be ball jointed while the wrists and ankles will be on a Figma like joint for pivot and rotation.
This time. I’m using filament for this project instead of resin. The model is taking longer to design than expected, but the results are coming together nicely. The “white” models were an earlier design where they lack swivels in the limbs, but the last image has the swivel joints.
Note that these models aren’t the final design. I have been kinda learning how to use Blender, and I added additional details to the later design. The final design/model for Tremblar is getting close and I want to make the rest of the Nonet Bakugan.
I used Tinkercad to create the Model because I have no experience in 3D modeling, I used a resin 3d printer to print the parts, and used a lego ball joint system to connect the pieces together. I titled this a “Prototype” because there’s a lot that needs improvement. I have a video on YouTube all about this Figure if you want to check it out.
Link To The Video: https://youtu.be/HGbiQoiK9E0?si=g4MjrE7GeEdCJWqn
This is my first time using a 3d software properly. I used Tinkercad because It's the easiest to use, and Tremblar is composed of simpler shapes. I'm Planning to 3D print, add joints, and turn this model I have created into an action figure.