Problems
Can you help me? I’m having a problem printing a cup holder for an Audi A3 8P. I’m printing with Gucai3D ASA filament. This issue has happened 4 times already, as shown in the picture. I’ve tried changing all the settings, but I haven’t been able to solve it. I’m using a Bambu Lab P1S printer.
These are my current settings:
Quality
Layer height: 0.16 mm
Wall generator: Arachne
Strength
Wall loops: 5
Top shell layers: 8
Bottom shell layers: 4
Sparse infill density: 20%
Sparse infill pattern: Gyroid
Speed
Initial layers: 35 mm/s
Initial layer infill: 105 mm/s
Outer wall: 50 mm/s
Inner wall: 120 mm/s
Internal solid infill: 60 mm/s
Top surface: 40 mm/s
Support: 100 mm/s
Support
Type: Normal (Auto)
Style: Grid
Threshold angle: 35°
Top Z distance: 0.16 mm
Base pattern: Rectilinear
Base pattern spacing: 2 mm
Top interface layers: 4
Top interface spacing: 0.2 mm
Support/Object XY distance: 0.2 mm
Others
Brim type: Outer and Inner Width
Brim width: 7 mm
Filament Cooling
Min fan speed threshold: 20%
Max fan speed threshold: 30%
Fan speed for overhangs: 40%
What could be causing this issue?