u/VanakuriKurivana

4wd will make wonderful stripes.

Height 4.5cm, mowing schedule every day, constant accurate stripe coverage. Crass in growing season (up to 2cm a day).

If you have a blank lawn, its the best pattern maker.

The problem is ... that under the bushes or hedges or tree branches where the mower can go under with ease, it doesn't. Software reads objects on his visual top wrong and mower doesn't mow under branches.

It doesn't simply Worx!

The problem is that a 4Ah battery mows basically ame as a 8Ah smart original battery.

There was a recommendation that if you change your 8Ah battery in Worx dedicated charger, then it mows longer. TESTED AND THIS IS TRUE !

So the 4wd base doesn't charge correctly. This causes the situation that a 8 Ah battery mows basically same as a 4Ah battery.

And remember, the 4wd does return back to dock when the 8Ah is 30-40% full, but the app tells you it has 10% power.

All this is causing the problem where users with 4Ah battery are getting 1:30 mowing times and users with 8Ah are getting 1:50 mowing time.

There is a claim that its supressed by software.

The test result where you let 4wd base charge the 8Ah battery to full (app says 100% and stops charging), you take then the battery out of mower, place it to Worx dedicated charger and you get extra 40 minutes of charge time in it and return the 8Ah battaer (freshly charged in Worx charger up to solid green light) and the mower will mow significantly longer. THIS IS TRUE!

At the end I got record mowing time in all those months it was 2:39 minutes. Yes 2 hours, 39 minutes, 59 second! (and it did return with two lights green on battery, 30-40%, but the 4wd app stated 10%). 💩

Meantime after a hour of mowing app showed 100% battery(unreal), it means it doesn't read its own original smart batterys correctly, thats a fact to !

So Worx is a piece of 💩 and is supressing mowing times of their own original smart battery's!

The problem is a fact that with original 8ah battery upgrade you have unreasonable low mowing times 1:30-1:50). 4ah last me 1:30-1:40.

It comes from that piece of 💩 software, it doesn't read original battery data correctly .

Battery has 40+% power, but the piece of worx reads it as 10%.

Going home takes up to two minutes maximum.

A week passed, I was requested to take of the heigh protective flowerbed borders that surounded my rose's and manually create no go zones around each flowerbed separately. I did that.

This piece of 💩, leaves at least 40-50 cm uncut. The no go zone is brutally smaller, and there is plenty of room to cut around it closer, but it doesn't!

For me it means 2 times in the week trimming manually for an hour on my yard. Never had that issue with my old cable worx with the censor on top of it....never.

This piece of 💩 is worse then old models with the sensor on them! And that's a fact!!!

It may cut an empty rectangular lawn, but it's not for those who have normal private yards with trees, flowerbeds or bushes and hedges!

Second time for me. Random Rain delay, even if mow in rain is on. There is 24C full sun all day, but the device is giving rain delay even when the mow in rain is ON.

After "perfect lines" (if you have no obstacles, trees flowerbeds, nothing else, only a square of green grass, then it does mow perfectly) it starts randomly riding over the lawn, letting behind random shitt cut trails.

AI should know the yard by now (2 month) and if it wants to mow around and behind objects or near the borders (disclaimer, it does not cut to zero!!!) it should do it as a first thing, not after "perfect"lines and fng them up by randomly riding over the lawn.

A piece of blind 💩!

Buy only when you afford to sue them!!!!

The epileptic seizure twitching is also in the new software version.

Sit in your Hi-Tech AI !

​

​

This is 4 days of mowing in the chessboard cutting mode. The lawn was cut to 3cm all over the yard before and its a proof that Work vision and cut to zero is real crap. Old Worx models did not let uncut so much, maybe 5cm or so, 40cm to 50 cm is madness!

​

NOT WET GRASS, GRASS IS IN IT'S GROWING SEASON AND LUCID ! Not only doesn't it cut to the edges and leave up to 40cm of uncut around flowerbeds or objects. But its constantly stuck with the crass mass what the main cutting blades throws onto and into it. All the cut grass flies onto the edger blades and clogs them.amf the motor. A very bad design decision.

It really "doesn't Worx"

Got no notification what's so ever. Just started to take rounds and dig my ground.

​

DO NOT BUY WORX, ITS A PIECE OF CRAP... REAL-LIFE EXPERIENCE!!!!

​

Its a horror pies of tech!

The Worx 4wd reads shadows as opsticles, and thats why your lawn isn't mowed.

Reads Dandys as I don't know what and does not mow. And thats how un mowed spots and borders are made...

🥧 Of 💩

The notification doesn't work on that WorxCrap.

Had managed to ride backwards onto a 15cm tree fence.

All notifications are turned on, still did not send it to my mobile.

Would fit perfectly and would mowed perfectly near a opsticle, but WORX decided to f you in the face and leave an not trimmed area that will grow day by day!. Doesn't matter is it nearing objects from right or left (with cut to edge module) it will f you in the face and turn away without mowing even it fits perfectly without any collision.

And that's why you have in a week a 40cm uncut lawn around every damn object in your garden (trees, flowerbeds, objects s.o).

At last, I got that piece of s**t on video.

Don't know how long, but this piece of s**t stays on spot and twitches on spot until you interrupt its vision fiscally. Hope this Epilepsy attack doesn't start tu burn on spot and ignite my house or burn out the wheal motors or that 8Ah battery inside.

Fng piece of overpriced crap!

Yes camera lenses are clean.

My 4wd Worx stared to fly... over the house it seems.