Login

u/VictorHeh

▲ 4 r/FormD

Can someone recommend me stand-off & screws packs for the t1, I have lost some of mine and don’t know the right size, I can get them from Amazon if that works?

I want them to do multiple standoff mods to space the GPU, mobo, psu ETC and have some spare ones as well

reddit.com
u/VictorHeh — 4 days ago
▲ 0 r/FormD

multiple BSODs 'video scheduler internal error' Is the included riser gen 4 from formd back in the day, faulty? i came back to my t1 today with different hardwarde (sold previous amd gpu pc) installed a 5080 today and was having so many issues i thought the card was broken for a second.

Came back to the T1 today and Multiple BSODs with error 'Video Scheduler Internal Error' , VGA white LED on mobo, is my riser cooked? I was able to fix it re-seating everything and setting the riser to operate at gen 4 on the motherboard. It's the default riser that comes with the t1 from formd

But initially i wasnt even getting video output from the GPU. Fresh windows install.

Wonder if i should buy a different riser for my 5080?

reddit.com
u/VictorHeh — 5 days ago
▲ 7 r/SSUPD

Hey guys, I just finished my build and its running great, temps are great, but I have two issues

  1. I have my Meshroom SV2 in 4 Slot mode with the AXP120x67, I already knew the side panel would not close in its 4-slot configuration as the limit is 74mm for 3-slot and 54mm for 4-slot, but I wanted to use a strong hook to the post to get people to engage and that's the cooler I had laying around from my previous build, I need it in 4-slot mode cause I have a 3.5 slot Zotac 5090 Solid on this bad boy.

-> I was intending to get the Thermalright AXP90 X53 Full Copper, it's only 1mm short from the max cleareance in 4-slot mode, does anyone here have that CPU cooler in 4slot configuration? can you close the side panel? do you get any turbulence? I'm currently running a 7600x3d, but I've seen people run a 9800x3d with this cooler, so I'm thinking I should be fine?

-> I don't really want an AIO because I travel and move around (not a lot) but enough to not want to deal with removing an AIO due to TSA max. liquid clearance and what not, air is just easier. (I will remove the GPU everytime and transport it with me in its original box tho, can't trust that heavy brick to be moving around during a flight)

  1. My SF1000 is rock solid and everything is plugged in smoothly, CPU cable sits perfectly with lenght to even cable route it in a clean manner with no strain to the cables, GPU 600w 12VHPWR beautifully routed no strain on either ends, but the motherboard 24 pin, Jesus Christ? I managed to get it plugged in, but like, I can't move it or push it in without straining the cables and potentially slightly disconnecting it from either the PSU or MOBO Socket.

So I didn't even try to "push it in", just connected in a way there's the least amount of strain as possible on the cable on both ends while remaining fully seated and connected.

-> I figure getting a custom lenght cable would be my best bet, what lenght do I get tho? and since I am getting it, I'd get it in white and for the other cables as well (CPU and GPU) so it matches the case color and everything.

I figure the standard lenght for CPU and GPU, as these lenghts already fit me pretty well, but what lenght should i get for the motherboard's 24 pin connector? and which custom cable supplier? I've heard of Moddy is it good? which type of cable? there's like 4 different ones.

TIA!!

TLDR: Title was a hook, I knew it wouldn't close but wanted to GAME, need air cooler recommendations for 4-slot mode, need custom cable advice to prevent strain on very tight and already strained motherboard 24pin connection even with the SF1000 individually sleeved cables, the standard lenght is slightly too short.

u/VictorHeh — 29 days ago