u/confusionPrice

I’m still working on the part where you program the computer to flash AA 55 on the 6522. I’ve replaced all the address and data lines connecting the chips with actual solid wires and am only using the jumpers for the nand gate and connecting to LEDs. The problem is that when the eeprom should put A9 onto the data lines, it puts AC. I’m using an Xgecu pro eeprom programmer and Xgpro to program it. I’ve checked all the data lines and address lines to make sure they connect correctly and didn’t see any problems

I reverse image searched and it came up with lots of “no swearing on my Christian Minecraft server” memes but I couldn’t find anything that seemed like the origin

Just got a Vic 20. Currently learning how to make custom characters

So I’ve been working on the 6502 kit and this is an update to my last question because i needed to get more info for people to be able to help me. So the program that blinks 55 and then AA from the second video is sort of working and sort of not. As you can see sometimes if the LEDs choose not to change. I’m pretty sure for a few cycles it worked but then they went back to not changing sometimes. I’m working on a wooden desk and the tape on the bottom of the bread boards is intact, so I don’t know if it could be static or anything like that. I’ve double checked that each connection is correct and rebuilt it again to make sure, so I’m not sure what else could be wrong. Also the way I solved the last problem was that now when I turn on the computer I first hold the reset button for a bit. Thanks

I’ve been working on the 6502 kit and have gotten to the point where he shows you how to make the program that makes the LEDs attached to the B register blink 55 and AA. I followed everything as well as I could and even refollowed everything but the B register never lit up. I looked at the address lines during the code running and they matched what the video showed, but the data lines didn’t. So I assumed it was my code. I looked at my code and didn’t see anything by wrong, so I’m hoping someone here can help find something wrong. I’ll show screen shots of the hex file and also the bytes 7FFC and 7FFD. Every part of the file not shown is programmed to EA