Storage solution
I have finally finished painting and storing all of Marvel united. With some very light wood/metalwork and a load of 3d printing i have managed to get everything from all 3 seasons into 1 box.
It starts with the storage box i will link at the end. The majority of the cards sit in 3d printed cases on the bottom of the box. Next a piece of 1/4 inch plywood sits on top and then the tokens, villain dashboards, campaign cards, cardboard mission cards/location extras and more cards. All those sit in various 3d printed boxes. Then another piece of plywood with some 0.5mm steel sheet fixed to it sits ontop of that. This holds the locations, equipment cards, sinister 6 modules all the minis from s1 and all the big figures. The figures are fitted onto 3d printed rings similar to the ones from blue/gold team boxes and they have a magnet embedded in them to allow them to attach to the steel sheet then each figure is labeled on the base as well. The next layer is again plywood with steel sheet and it holds all of the s2 minis. Finally there are some 3d printed brackets to support the next level which holds all the s3 minis plus the infinity gauntlet and a small amount of cards that I couldn't store lower down after witching hour arrived.
Every single component stored in 1 box.
Here's the box I used