Need Help With RF Setup
Hey all! Was hoping to get some help with an RF setup I'm running for my band. I think I'm in my head on this. I recently side-graded to Audio Technica ATW 3255's (5 channels) from the PSM900's. Main reason was wideband. I'm noticing the AT's are more prone to dropout where the PSM900's would hold connection. We're doing bar gigs and occasionally do some crowd interaction so we'll go out into the crowd. Definitely a challenging RF situation but I think its my setup not the ATs
Right now I'm running 4 channels (the 5th is spare we run on a whip if needed in a pinch) into an active phenyx pro combiner with gain compensation. a 25 foot amazon BNC cable to a Shure LPDA paddle antenna I typically run about 7 feet high pointing toward stage and crowd (so behind us stage left usually). The show last weekend we got a hard drop from our guitar player in crowd. This was a total blackout until he got back on stage. I was running the combiner at 0 compensation so I'm thinking the BNC cable quality and length might have been the culprit.
Just tested at home with the combiner gain set to +4 and it seems to get a noticeable more stable connection. Tested in basement and walk tested putting it out of sight and making have to punch through walls etc. (obviously a stress test as line of sight is always priority at shows).
The other members on stage btw had no dropouts the entire night.
Our PSM900's have been rock solid for the most part. Occasional drops here and there but we put them through some pretty interesting scenarios and they come through. I run those at 10mW on a PA411 combiner with the same paddle and cable.
Am I expecting too much from this wireless gear? The AT's have some great reviews, and again with clear line of sight they are REALLY great, but I'm thinking I can push them a bit more for our crowd interactions and just wasn't compensating for the cable length and quality.
Any help would be super appreciated!