Help with Omada ER706W
Hi. First, I'm just a newbie IT person who is tasked to set up our network with two ISPs using Omada ER706W as a stand alone router. Second, sorry for my english.
Here's the set up:
First ISP: their modem is edgecore network ecs4100-12T, fiber connected, and with its own ip address (210.4.x.xxx), subnet, etc.. We have an enterprise contract with this ISP, meaning each connected device has their own dedicated 25Mbps.
Second ISP: Skyworth router, fiber connected, with 600Mbos plan
These two ISPs are connected to ER706W. I configured the ports to have two WANs. Then ER706W is lined to switch (D-Link DES1016A)
What I did so far:
Since I'm using omada as a stand alone router, I configure it through its IP in web.
First ISP: I use static IP as connection type and I put all the needed infos (ip, subnet, default gateway, etc) since when using dynamic on both ISP won't establish connection
Second ISP: Dynamic ISP
On Load Balancing: I turned on load balancing, turned off link back up. Both connections are online in Online Detection
My problems (and the ones that I gave up googling):
We should have our dedicated 25Mbps on our PC (Ethernet connected) and use ISP 2 as our Wi-Fi (or back up connection if ISP 1 got issues)
Biometrics and CCTV should use ISP 1, printers to ISP 2
We only have 20-80Mbps of connection and most of the time, high pings (what I think is we share the connection speed).
----
I need help and suggestions, and I'm open to constructive criticisms. This is hard for me since I'm new to this kind of set up. Thank you much!