r/3Drequests

Hi everyone!

I'm looking for a 3D artist to model a highly detailed and screen-accurate bust of Qilby in his TRUE FORM from the animated series Wakfu (Season 2).

Specific details needed:

• Version: True Form (with his evil/maniacal expression and dark body tattoos).
• Left Arm: Must include his black shoulder pad (pauldrons) and his spectral cyan/blue Wakfu arm/hand (as seen in references).
• Scope: Bust only (head, Eliatrope hood, upper chest, shoulder pad + Wakfu arm).
• Format: .3mf file ready for Bambu Lab (A1 mini), painted/colored if possible, or clean STL with a flat base.
• Budget: $15 to $20 USD (via PayPal).

References:

• Image attached to this post.
• Video reference showing his true form: https://youtu.be/LcOVyefmXWE?si=JRAWlMhS-gBfxpAS

Please DM me or reply with your portfolio if interested! Thanks!

https://www.printables.com/model/1141383-netgear-gs305-10-rack-mount

https://www.printables.com/model/1179328-jetkvm-10-inch-rack-mount-with-keystone-slots

I'm wanting to combine these into one STL, with the large oval ears, the Netgear to the left, 4 keystones to the right of it, and finally the JetKVM mount to the right. I've attempted it in Blender twice myself but have had no luck with the post-slice for my printer, once combined they... aren't right. Budget is: $25-$50

I have a scanned architectural medallion (STL, ~90k triangles) that I plan to resin print.

I need the STL file to be modified slightly.

Requirements:

• Create a recessed pocket on the back.
• Pocket follows the medallion silhouette.
• 4 mm border around the perimeter.
• Pocket depth: 6.35 mm (1/4").
• Preserve the front relief completely.
• Output: STL ready for resin printing.

I can provide the STL immediately. Please send your price and turnaround time! Will pay via PayPal. Budget: $10-$25 

Thank you!

POSITION FILLED

Hello! I’m looking for someone to create a 3MF file (and possibly print) a copy of this 1920s parade lantern. These were hand-made and are not branded or trademarked in any way.

1. The Jack-o-lantern:
2. They were originally made of tin, so about 0.6mm thick. 7” tall with a circumference of about 22”. It has 14 vertical “pumpkin ridges” and a slightly textured surface in places. It will be painted, so please print it in black and don’t worry with the painted details. Please make the eyes, nose and mouth as close as you can to the pictures. The original was in two parts that slid open so a candle could be inserted, but this can be in one solid piece. It has a small hole in the top and bottom to accommodate a stick.
3. The stick and base:
4. Please print a stick that fits snugly through the holes. It should be 12” long, not including the spindle on top. The base should be about 4”x4”x1” (my best guess) square and should accommodate the stick (see pictures). They can be printed together if that’s easier.
5. The spindle
6. Please print a spindle for the top that looks similar to the one pictured. It should be about 1.5” tall and ac screw onto the stick or attach in some easier way.

Lots of pictures are attached and please don’t hesitate to ask questions. Budget $100-$150. It would be amazing if someone could both design and print it, but I’m not sure if that’s allowed on this sub. Also, use your best judgement if my estimations seem off. Thanks very much!

I’m developing a meal-prep backpack and need someone to model the interior rack so I can print a prototype at my library. I’m not a CAD person and I’d rather pay someone who is than produce something unusable.
Being upfront: this is for a product I hope to sell eventually. Happy to pay your rate — this is a prototype, not production, so nothing needs to be manufacturing-ready.
What it is: an open frame that holds three food containers in horizontal slots, like a small three-drawer fridge organizer. Containers slide in and out from the front on rails.
Specs:
• Overall: 8.25” W × 5” D × 7.5” H
• Three slots, 2.25” pitch
• Each slot holds a container 7.75” × 4.75” × 2” — needs ~3mm clearance so it slides easily
• Side rails to support the container, with a stop at the back so it can’t slide through
• Recessed handle on top (I lift the whole rack in and out of a bag)
• Open front — no door
What I need: an STL for printing, plus the editable source file (Tinkercad link or Fusion file) so I can adjust dimensions myself as I iterate. That second part matters more than a perfect first version. UPDATE: If you have the ability to 3d print the prototype that I have described within the budget listed, please dm me.
Sketch attached. Ballpark quote and rough timeline appreciated. Thanks.
Budget: $100-$200

Hey,

I am using a FlashForge Adventurer 4 and want .stl-files of a coin that could fit a german shopping kart. The dimensions should be: diameter of 2.5 cm and thickness of 2 mm. The coin should be more or less flat.

The trophy should have a stand and it mustn't break too easily. How the logo stands on the thing can be artistic freedom.

My budget is 10 - 30€.

I have this AI image for reference. I realize this is pretty complicated so some of the details can be smoothed out to make it easier, some details can be omitted entirely (to be discussed after hire). This would be resin printed. Final dimensions would probably be about 70mm at the base, maybe 100-120mm tall.

Budget: $50-60? I have no idea how much this should cost so I'm willing to negotiate.

Hello!
I'm looking for anyone who is or might know a 3D sculptor with the ability to recreate the old 1982 Imperial Dragon (aka Chicken Dragon) as an stl. The model is currently effectively lost media, hence the interest in it as all other attempts to make it accessible to the public have failed! I found an AI recreation someone had made, but the jank is simply far too significant and differences many, though its maybe about 60% there. I tried hiring through etsy but just found AI scammers. I'm a student and a friend's attempt to have the model sculpt ended in them getting scammed, so there isn't a huge amount I can offer.

Budget:
200-300 CAD

Here are some images I've collected of the sculpt as well as the AI render I found.
https://drive.google.com/drive/folders/1QUYcmKqty8FoNp1BUyELzkojHxRHNKiJ?usp=sharing

Maybe the AI render could be used as a foundation or something to help?

I have a small trinket that I put on a necklace as gifts for burning man. In years past I had someone laser cut the pieces and I would glue them together. I was hoping to learn CAD and design it but I am too busy. I am looking for someone to make a .3mf file of it so I can print it on my Bambu P1S. I have all of the dimensions. I would like some changes made to the design.

Of the pictures, I will use the colored ones for reference. I would like the bottom hole on the top piece, moved to the bottom piece on the back, or on the "red piece". I would like the bottom hole to be concave or a bowl-esque or spoon-esque. I would like the burning man "man" symbol added to the front, where the hole was on the white. On the back, change the year to '26.

If possible I would like the file in 3 color schemes. The front lettering & man symbol one color, the back lettering one color, and the entire trinket as one color. The red/white can be one object. It does not need to be two pieces. Can remove some of the "red" spacing between the would be fur and the white on the sides.

I am also open to a more cohesive design. Im ok with it being thinner or "one piece." And the "fur" or spikes of the red being even level with the white. Maybe a small border to separate it. If you could give the fur some three dimensional shape that would be awesome! The O's in GOOD are googly eyes.

In the colored photos, the sizing is as follows:

White: 3mm depth, the word space top to bottom 12.5mm, the word space width 55 mm, its 60 mm from bottom to top. the top hole is roughly 2.8mm diameter. the bottom hole is roughly 6.5mm diameter.

Red: 3mm depth/height. 66.5mm wide with fur, 20 mm tall in fur area, 60 mm tall top to bottom for the pole.

I have added 5 pictures. The first one is my "totem" that it is designed after. The next 3 are the red/white images I was referring too for changes. The last one is the "man" symbol.

Paying $20 for the file. I have the trinket in hand and a caliper if you have questions or need more information. I am open to a few different designs and will pay a few people to see their take on it. I may even print a variety of designs to make them more unique gifts.

Cheers!

Edit: Thank you for the overwhelming amount of responses. I will slowly reply to people throughout the day.

Hey all! I'm willing to pay $10-$50 for my hype chain necklace update. The colors and geometry are off and I just need it fixed. Colors and files are included. Photo is also included. Open to any questions!

https://makerworld.com/models/3011303?appSharePlatform=copy

I am trying to 3d print this vintage lotus lamp. I am willing to buy materials such as translucent filament and PETG for the base. I am wanting 4 flower blooms and I can figure out the wiring myself but I will need openings for the bulbs. I want this 5ft or 6ft. I am willing to negotiate price if work is extra long or complicated

UPDATE: I will be finding the measurementts and responding to each person once I find it. It is my first time and im new to this. Thank you

UPDATE UPDATE: These are the specs and its a mix of my research and AI

WHOLE LAMP

  Overall height ............. 73 in (~6 ft) ................. [DOC]

  Overall width .............. 18 in .......................... [DOC]

  Overall depth .............. 13 in .......................... [DOC]

  Flower count ............... 4 ............................. [DOC]

  Power ...................... 120 V corded, pole switch ..... [DOC]

FLOWER BLOOMS

  Flower diameter - real ..... ~13 in (33 cm), splayed ....... [DOC]

  Flower diameter - print .... 9.5 in, curled in ............. [PRT]

  Flower depth - real ........ ~6 in (15 cm) ................. [DOC]

  Flower depth - print ....... 4.4 in ........................ [PRT]

  Inner "S" petal ............ 2.8 in W x 6.5 in L ........... [DOC]

  Outer "C" petal ............ 2.75 in W x 6.0 in L .......... [DOC]

  Petal thickness - print .... 2.2 mm ........................ [PRT]

  Petal thickness - real ..... ~2-3 mm (glass) ............... [EST]

  Center hub hole ............ 26 mm (1.0 in) ................ [DOC]

  Petals per flower .......... 8 inner / 8 outer ............. [PRT]

STEM / SPINE

  Construction ............... lower tube + S-curved rod ..... [DOC]

  Lower column diameter ...... ~2.5-3 in ..................... [EST]

  Upper wavy rod diameter .... ~0.75-1 in .................... [EST]

  Socket spacing up stem ..... ~12-16 in apart ............... [EST]

BASE

  Material ................... round brass-plated iron, weighted [DOC]

  Diameter ................... ~11 in ........................ [EST]

  Height ..................... ~1-1.5 in ..................... 

SOCKETS / ELECTRICAL

  Socket type ................ E26 medium base ............... [DOC]

  Socket count ............... 4 ............................. [DOC]

I would like to add a batsuit display to a shelf, but I don’t know where to start. I think ideally 3-D printing would be the way to go, but I’m new to that world of 3-d printing. Doing research seems like I need a file and then ultimately to have somebody print it.

I’ve gotten an enquiry to make this badge, im a noob in the technicalities of 3d printing, if someone could help me with the 3d design of this it’d be highly appreciated.

Since I live in UAE i’m expecting the budget to be about 75-100 aed for this design.