
r/CursedGuns

Old Vietnam/taxi driver/ hippie pot head neighbor’s one of many guns.
Four-Barrelled Blunderbuss
>Be 5121
>Plundering with me crew
>Yahar.png
>Hector calls "Git over here! I see something ye might be likin!"
>Hobble me way over to Hector
>"Looky 'ere!"
>BythelockerofDavyJones.png
>It be a fuhckin' 4 barrelled blunderbuss
>Cap'n Chester walks over, wonderin' what the fuss be about
>Eye patch flies off
>"GIMME THAT!"
>Takes the abomination of a gun away from Hector
>Cap'n fiddles with the powder bag
>Accidentally pulls all four triggers
>Scurvy-dog's face when half of the ship was blown off and four of the crew were but a fine mist!
The more I look the worse it gets...
...and the less sure I am as to what the hell I'm looking at...
Do you have pictures and references of AK/AR hybrid guns that have features from both lines of rifles?
Basically, I'm looking for pictures of real life, real world guns- handmade or officially produced- that have features from both AK rifles made by Kalashnikov and AR rifles designed by Stoner, stuff that could include the more modern AK-pattern rifles Russia is producing with lots of AR controls and stuff like the CMMG Mutant that uses AK parts, as well as stuff designed and made in less professional settings.
Rifles I'm primarily looking for, but other weapons like DMRs, machine guns and the like, are fine as well.
If you can help me with this, I'd much appreciate it. Thank you for whatever assistance you can provide.
What in the grim darkness of the far future is going on in our Atlantan office 🙏
I took this abomination to a match
They kicked me out
“FALLOUT TWIN GUN”
We have reached critical levels of yugo bubba-ness
Found on A RPG subreddit
And the post was about post-apocalyptic paper RPG
Very crude experimental AMB-17 bullpup, as Kalashnikov Concern says, it was just an experiment and is not intended to be developed further for now
Rossi Brawler 5.56
“Behold……the poor man’s Q Fix.
Abomination or peak trailer-park engineering?”
What in the grim darkness of the far future is going on down in the hood?
CP33 stock adapter.
The first version had the brace strut attached to a discarded Trijicon base. (The brace strut is a piece of 22Lr barrel.) The MK2 melds the risers and brace strut into one unit. The MK3 uses an old NcSTAR red dot to maximize the goofy look. With the thumb screw on the riser stack it can be quickly removed, and you can use the standard height red dot to pretend you were not doing something so silly. :)