Got balsy, figured I’d test it and if it doesn’t work, I’ll buy more foam.
The legs on my 90s and connecting arms kept spreading like ya sista after Prom
SO like a maniac I decided to boil my fitting and Will ya look at that, they shrink back to normal, almost factory.
Top one : Ya Sista
Bottom : Boiled RCP :)
Do with this as you please
Fellow Austrians,
This Sunday, August 23, our RC afternoon will take place again. You can look forward to plenty of racing action in a relaxed atmosphere.
We’re always looking for new drivers of all ages. Beginners have the chance to do a few laps in our rental cars - for free - no prior experience required! If you’re interested, just stop by - no registration needed.
See you then!
---
Diesen Sonntag, 23. August, findet wieder unser RC Nachmittag statt. Es erwartet euch wieder jede Menge Rennaction in lockerer Atmosphäre.
Wir suchen auch immer neue Mitfahrer jeden Alters. Neueinsteiger haben die kostenlose Möglichkeit ein paar Runden mit unseren Leihautos zu drehen - keine Vorkenntnisse erforderlich! Kommt bei Interesse einfach vorbei - keine Anmeldung erforderlich.
Bis dann!
Until now I've really only run crawlers. Been wanting to dip my toes in racing and went to the local raceway. The dudes there were SUPER helpful and one of the guys even let me run his personal box stock car to get a feel for these before I made my purchase.
I promptly handed my son the radio and went into the shop area and bought this with batteries and a transponder.
Ordered tires as soon as I got home and can't wait to race this coming Friday.
Getting my son his own car in a couple weeks as well.
Will these bodies fit on my mr04w-mm without modification? I'm seeing a couple bodies I'm interested in but I need to make sure they'll fit.
Hello all,
I've been wanting a Mini-Z since I first ever saw them in the window of my local model shop (at the time I was racing a Nitro 1/10) and now might have the adult money to purchase one.
Since I will not be heading in the direction of racing with others, but mostly to play around with it a little I started to do some searches over the network, and have found plenty of discordant info.
The currently available model of MA-020 are the one equipped with the KT-531P transceiver, full bearings, but no ICS integration available. The chassis is "branded" as the MA-020 Sport (where some Google research says is lower quality compared to other ones).
Previous models (the one equipped with the KT-18) had included the longer wheelbase adapter, compared to only the stock one of the new model, and a plethora more of parts to start do more "tuning" based on the driver needs, also wider rear suspension arms.
Is there that much difference in the two version (older VS newer) or is just my imagination, seeing things that do not really matter?
Hello. I bought new wheels because I wanted to mount new tires on them. I should’ve bought new bearing too. but I’m trying to get the old bearing out of the old wheels to put in the new wheels. But they don’t seem to want to come out. Any help?
Can anyone tell me the cure?
Decided to change my jomu window to lexan and added a PN disk damper tonight. Made a whole lot of difference with a better lap time. Enjoying Mini-z a tad bit too much now.
Have it setup in a 4100 Evo2 chassis with some simple bolt-ons and its really not bad.
Hello. Planning to buy an RCP track, but unsure if I want 30cm or 50cm tiles. With the 30cm, I could do the mini 96 challenge as I already have Easy Lap timer system. Currently don’t have enough floor space for a permanent track setup, which I think plays a factor here. I’ve already done the DIY track but the lack of good barrier walls is the doe fall for me.
What would you buy and why?
I'm just outside Boulder willing to do a bit of a drive but was wondering if there were any good location around.
Someone lost a bet….😆 2 stages left to go.and it’s all paint(lexan body)