r/SignalRGB

Everything works fine, I have the 3 lconnect services set to ignore in the conflict manager but after a reboot or a restart of SRGB when I open SRGB manually I get the red bar saying it can't load the SRGB service due to the conflicts.
The only conflicts it shows are the 3 lconnect processes (that again, I have ticked to ignore)
Everything works like it should, the lconnect stuff is ignored, not closed, signal rgb and the service are running.
Is this anything to worry about or is it a aesthetic bug?
Again, everything works as it should except that message when I manually open it once after it restarts.

thanks

I need help (sumone please help me I am going crazy over this 😭😭)

I have been using signal RGB RGB controll for multiple years now .

About a week ago it suddenly stopped working for my fans .(They are local fans(came with the case) signal RGB used to work with them before and the same for my aio fans .

.....

It wos working for my ram but after i re-installed it it stopped even detecting it .

I have tried everything its just not detecting anything.

....

I updated every motherboard driver also even bios.

My mb is aorus 870e wifi 7.

Sumone please help me.

Complete spec

Rtx 5070ti colourfull

Acer Predator Vesta li Rgb 32gb (16gbx2) Ddr5

Aorus 870e wifi7

(I have a local aio and local fans their RGB is working through the RGB button on my pc)

I am thinking of getting a Keychron q6 max but i don't see it listed on the supported devices. Web searching results in other models needing a firmware change. Will the rgb work with signal rgb?

I'm open to keyboard suggestions. I like clicky switches like blue/black. I've read good things about gateron switches (I was looking to get the banana ones if i went keychron)

Still doing research and looking for advice

thanks

So i built a new pc recently but SignalRGB couldnt recognize my case fans. I have a Sharkoon Rebel C80 btw, iprobqbly kmow what the problem is cuz every fan only had one header which i used the splitter on that came with the case and plugged it into system_fan as described, but i cant find any possible rgb headers or sum like that.
anyone know a solution?

I've searched but cannot find clear instructions for this. Is it possible to utilize the Chroma Workshop per game settings with SignalRGB?

I finished up my first PC build...99% MSI

X870E Carbon

Ventus 5070ti 3x OC PZ Black

MSI Strike Pro Wireless keyboard

MSI Versa Pro Wireless mouse

Lian Li Hydroshift ii LCD-S

--w x3 MSI ez120 fans

x6 MSI ez120R fans

So when I went into the MSI Center/Mystic Lights, a link/ad came up for SignalRGB and it said that I could control everything MSI with Signal.

I was willing to give it a try, because Mystic Light is...ok...so far. Wanted to see what a different program was capable of.

Well, Imagine my surprise when during the "Discovery" phase (pulsing light on compatible items) that ZERO of the fans were recognized.

How can Signal advertise that you can control all your MSI stuff...but the argb fans aren't on the compatibility list?!

Disappointed.

As the title says, if I use the channel or the device pulse feature for any of the 3 headers all 3 of my populated aRGB headers pulse including the illuminated dragon logo also. Indicating they are tied together somehow. It didn't used to be that way before the recent rounds of updates.

Just got the 60HE v2 on my hands today!!!

One question though, is there and will there be a SignalRGB support for said keyboard?

I've always liked the Screen Ambience feature from the RGB software and since the lighting on the v2 gets so vibrant and bright, it would definitely look amazing with the both together.

Hi everyone,

I’m hoping someone here has dealt with this specific conflict. I’ve just built a new PC and I'm experiencing severe system-wide stuttering and mouse lag that is directly tied to SignalRGB.

The Issue: After SignalRGB has been running for a while, my entire system becomes unresponsive, specifically with mouse input lag. The moment I "End Task" on SignalRGB.exe in Task Manager, the system returns to normal instantly.

My Setup:

• Motherboard: Gigabyte B760M AORUS ELITE
• RAM: 32GB Corsair Vengeance RGB
• GPU: Intel Arc B580
• OS: Fresh Windows 11 install (not activated yet)

Troubleshooting steps I’ve already taken:

• Completely uninstalled Gigabyte Control Center (GCC) and removed all associated background services/drivers.
• Switched the SignalRGB renderer from QtWebEngine to Ultralight.
• Disabled GPU lighting control (since the B580 isn't officially supported anyway).
• Confirmed no other RGB software (iCUE, etc.) is installed or running.
• Checked Task Manager for conflicts—only "Gigabyte Update Service" was visible and it has been disabled.

Has anyone else had a similar experience to this? Are there specific settings in SignalRGB (or BIOS settings like "SPD Write") that I should be double-checking to prevent this interrupt storm?
Only thing I notice is the prompt message of "Windows Is not Activated yet"

Any advice would be appreciated!

SignalRBG question,

I have the Jungle Leopard Prism 4 Ultra fans. There is no default option when searching for them so I had to use a generic RGB fan option. But I cannot control the LEDs individually. Only control the fan as 1 unit. Do you know of any troubleshooting options that I can shut the middle LED'S off (in the fan blades) and keep only the outside LEDs on?

Hi there, I recently did a gpu upgrade on my pc, during which I changed the psu and got some new argb fans (Arctic p12 pro reverse) I have them hooked up to a nollie x8 which is powered and then plugged a USB header on my msi x470 gaming plus Max mobo (no native argb headers) when I first started using it after the upgrade the fans were not lighting up at all other than at shut down they would quickly flash red, since then after multiple attempts to set up signal rgb, nolliergb, each on their own, I even tried Openrgb, nothing has worked, and the fans don't even flash red anymore. The red flash makes me assume it's a software issue? But that could also just be the nollie unit reacting to losing power by flashing red as they apparently do?? But I'm not sure why that's stopped now.

Any ideas on how I can get this to work?, signal rgb also isn't working with my new gpu but I wasn't expecting to as I've flashed the VBIOS so it is recognised as the wrong card, that's an issue for later.

Thanks :)

I do not think SignalRGB can map the Corsair mouse buttons.

I really dont want to run iQue all the time. But is it really no nig deal to run it with Signal RGB? Can you turn off all the RGB functions so that it pretty "lightweight" when running and use it jsut to map the mouse buttons?

Are there alternatives that people have used like this

https://www.highrez.co.uk/downloads/xmousebuttoncontrol.htm

Anyone confirmed functionality?