r/XMG_gg

Price changes on bestware for XMG and SCHENKER (October 2026)
▲ 14 r/XMG_gg

Price changes on bestware for XMG and SCHENKER (October 2026)

Hello everyone,

unfortunately, only a short time after our last price update on September 18, we have to inform you about further price adjustments for XMG and SCHENKER laptops on bestware today.

New prices as of October 2, 2026

The starting prices of many of our current models have increased again today. The extent of the adjustment varies depending on the model.

To avoid unnecessarily spreading the development across several consecutive tables, we are comparing the new prices directly with the price level from before September 18, 2026, i.e. before our last update a few weeks ago. The changes shown below therefore represent the total price development across both rounds of adjustments.

As RAM currently accounts for a significant share of the additional costs, we are also showing how much RAM is already included in each model's starting configuration.

Why another increase so soon?

The memory market has tightened considerably again within just a few weeks.

In the current highly volatile market environment, depending on supply windows, availability and new purchasing requirements, our procurement prices don’t always change gradually anymore. Newly available batches can rise significantly above previous price levels at relatively short notice. Longer-term price commitments are virtually impossible to obtain for some of the most needed components.

DDR5 memory is particularly affected. In our September update, we already showed how sharply RAM prices had risen since mid-2025. Since then, the terms available to us for restocking our SKUs have deteriorated further.

The same trend can also be seen in more recent public market data:

As stated in our previous updates, these adjustments reflect increased procurement costs and are not intended to expand our margins. We recalculate each model and its configuration options based on current and foreseeable procurement costs. This also means that today's pricing has to take into account the conditions under which a particular configuration can be restocked in the future.

On bestware, we also offer optional RAM downgrades to as little as 8 GB in Single Channel. For business and technical reasons, we cannot offer systems completely without RAM.

Additional impact from an unfavourable exchange rate

Another factor is the development of the euro against the US dollar.

A significant share of our components and barebones is priced in US dollars. Over the past four weeks, the euro has lost around 2.5% against the dollar. You can see the development here. For goods purchased in US dollars, this translates directly into higher costs in euros, even if the actual USD price of a component remains unchanged.

While this effect is smaller in percentage terms than the current price movements for RAM, it affects virtually the entire laptop, including the CPU, graphics card and display. As a result, we also had to adjust the prices of some CPU and GPU upgrades slightly upwards again.

Overview

Effective today, October 2, 2026, on bestware:

Model RAM included in starting price Change in starting price Additional changes
XMG APEX 16 (M26) 32 GB + 300 € Ryzen 9 9955HX: + 40 €
XMG APEX 16 MAX (M25) 32 GB + 350 € Ryzen 9 9955HX: + 40 €
XMG APEX 17 (M25) 32 GB + 350 € RTX 5070 (12 GB): - 50 €
XMG CORE 15 (M25) 32 GB + 300 € -
XMG CORE 16 (M25) 32 GB + 300 € -
XMG EVO 14 (E25) 16 GB + 70 € Ryzen AI 7 350: + 20 €
XMG EVO 15 (E25) 16 GB + 70 € Ryzen AI 7 350: + 20 €
XMG EVO 15 (M25) 16 GB + 100 € -
XMG FOCUS 17 (M25) 32 GB + 350 € -
XMG FUSION 15 (L25) 32 GB + 350 € -
XMG FUSION 16 (M25) 32 GB + 300 € RTX 5070 (8 GB): - 35 €
XMG NEO 16 (A25) 32 GB + 300 € RTX 5090: + 190 €
XMG NEO 16 (M26) 32 GB + 200 € RTX 5090: + 190 €
XMG PRO 16 (M25) 32 GB + 350 € -
XMG PRO 16 VE (M25) 32 GB + 300 € -
XMG PRO 16 VE (M26) 32 GB + 300 € -
SCHENKER CONNECT 15 (E26) 8 GB (unchanged) -
SCHENKER ELEMENT 16 (E26) 16 GB (unchanged) -
SCHENKER KEY 18 Pro (E25) 32 GB + 500 € RTX 5090: + 120 €
SCHENKER WORK 15 (M23) 8 GB (unchanged) -
SCHENKER WORK 15 Base (M23) 8 GB (unchanged) -
SCHENKER WORK 17 (M23) 8 GB (unchanged) -

All prices include 19% VAT. The changes shown refer to the price level before September 18, 2026, and therefore also include the adjustments already communicated in September.

Closing statement

We know that another price adjustment within such a short period is not welcome news. This is precisely why we do not want to simply publish new prices without context, but instead explain transparently why our calculations are currently changing so quickly. We are keeping the adjustments as limited as reasonably possible under the current circumstances and will continue to monitor further developments closely. If relevant procurement prices fall again or exchange rates move in our favour, we will reflect this in our retail prices as well, just as we have done in the past.

We are happy to answer any questions about the changes and the current market situation here in the thread.

// Tom

u/XMG_gg — 13 days ago
▲ 3 r/XMG_gg

Thermal Throttling Neo15 M22 repaste

I have a Neo 15 M22 that's about 4 years olde now.

For a while now, I've noticed the fans ramping up more than previously and the laptop running a bit slower.
I also don't know if it is my immagination but I have a feeling the air comming out of the laptop used to be colder.
After running some tests, the CPU hits 95° on a couple cores and only 75° on other cores while only pulling around 50 watts.

Does anyone know if this might be old thermal paste or something else entirely. I'd also like to know if anyone has attempted to renew the thermal paste and how easy it would be for someone who has built desktops before but never really touched laptops.

My cinebench r23 score is 12048 on full tilt overboost enabled and oasis running.

reddit.com
u/RealVincentCoucke — 12 days ago
▲ 12 r/XMG_gg

Unbound the full potential of your GPU

This tool is primarily developed for laptops. keep that in mind ;D

last update 4.10.26
supportedare:
manufactory: every with a 5000gen card
GPU: 5090 / 5080 proof
Driver: every driver
Windows: within a normal session with secure boot on

current work phase: implement 4000gen

Latest version 1.9.12

A short introduction:

Damn im not good in the explanation things but i give it a try.

This project was started and made by myself. Im use a pcs recoil 3 16" thats equal to a A25 from xmg or hydroc 16 G2. These laptops share cross the board the same barebone at all.
I was given the laptop to TechModLab and he installed a shunt up to 250w for the gpu.

this barebone can easly handle that wattage also for dayli usage.

after 6 months straight using this laptop i never noticed any problem with this shunt but im hitting some power clamps in some cases.

At first i thinking ok im just hitting my power limit for the gpu thats also extremly optimised in this state.

But after monts of using i was wondering what caused that clamps and at this time Mvolt was released that give us the access to Xbar.

After alot tweaking and noticed how strange the power policy on laptop could be im start to code some stuff via a custom kernel. I was able to find while debugging every limit what was be set from nvidia and was able to bypass them.

But here was the next big wall i had to overcome by getting it running into a normal windows session without changing the nvidia sys kernel at all.

It took me nearly a month to find ways to get this values changed and also i was search for some help by 1usmus. I was asking him in exchange for my code for some tipps how i could handle some strange ways but he was straight ghosting me the admins on hydra discord also >.>

So back to reality i was able to find step by step the needed paths by myself. I couldnt deeply explain how im done it correctly otherwise nvidia could fix my used paths.

Here a very short expl. how this tool in generell works:

My tool is reading at startup the ec/vbios and driver values. after choosing the wanted values it start to change values and pls dont ask about the path im using here. simply im able to give the sys commands to change things im want by himself. that allowed a full functional and useable nvidia driver by not bypassing any kind of security. this allowed some bigger options. This tool runs 100% in a normal windows session with secure boot activated and by not customise the kernel u can also play anti cheat games by not risking ur accs.

if ur restart ur laptop all option are back to normal because we didnt hardcode/write values into the kernel. that was the biggest problem for me to getting running.

this whole project is compiled into a portable exe that should get his own folder anywhere on ur laptop. after first starting it creates a gui folder where the exe still present. here are saved the ec and vbios and driver stock values also the startup protocol if something went wrong.

Now some pics of my tool.

normal value range

xoc value range

In combination with "Mvolt" and "Afterburner"

Mvolt + my tool + Afterburner

Im just startup my tool set the limits i want went over to afterburner and apply my fav custome curve and went over to mvolt to do some fine tuning for xbar and voltage.

https://preview.redd.it/z21563u0gith1.png?width=1080&format=png&auto=webp&s=2c130f112b49e68e264cce6d0d013bd0c1e4c805

https://preview.redd.it/6tagg8pbgith1.png?width=1080&format=png&auto=webp&s=5cdf4048c453a9aaf6b26b03a4a961e474c54098

with this tweeks im able to get These scores on a 5090 laptop

https://preview.redd.it/7t4c6fndgith1.png?width=1080&format=png&auto=webp&s=a7df369440420a0962b5947c8995a209bf6a1f69

https://preview.redd.it/y80fis8egith1.png?width=1080&format=png&auto=webp&s=6dffee8d21bd46b2c700ed90a7d844af4b9cacf7

https://preview.redd.it/n6lnihxegith1.png?width=1080&format=png&auto=webp&s=07b93370b778c96707b49987fb316cae0726817a

A quick greetings to prema at this point. we try to get any possible power out of this laptop gpus but i get this place back soon hehe

At the end im trying consistently to create more and more compatibility for dif laptops / gpus / vbios / ec versions. at least the 4000gen should also be supportet but again this tool is mostly for exp user that know the hardware limits in particular they vrms and heat limits.

sooooo here is the good thing: https://github.com/Heavyfail/Unbound-Power
(had to change the links caused by strike from google drive :D)

At least: dont try to burn ur laptops :D and if ur wanna follow the active development u could join the xmg discord into the A25 channel.

Just a video tutorial with crappy eng skills xD

https://reddit.com/link/1wwjkwp/video/gjpo6eylvhth1/player

LATEST UPDATE:
08:38 utc+2
04.10.26

reddit.com
u/Heavyfail — 12 days ago