Pinball: Stellar Wars I NEED HELP.....still!
Stellar Wars, Williams system 4,
Upgrades: Kouhout PCB power supply
Kohout PCB soundboard
- My machine was working and it was having issues the repair guy didn't fix before he took off and never came back. The issues were when the flippers were activated they would sometimes register points and would make programmed sounds. When he first showed up the issues were that the 28volt flipper in and out where registering zero volts at the digital auto reader on the power supply board. Also there were 2 separate lights out on the board 28 volt flipper in and 28 volt flipper out. The machine wouldn't start and now it's doing the same thing.
When I run the auto test I am not getting the pop bumpers in the upper middle right and left numbers 19 and 20 to activate but they activate when I touch them? Also the flippers will work when I push them but again they are making computer sounds.
The game will not start when I hit the credit button at any time.
How can I fix this? I've checked continuity through each fuse and the wires but I don't think it is that anyway because I can actuate the flippers when I press them during the auto check and I still get the flips making sounds. I don't know why the 2 pop bumpers won't accurate during the auto test but will if I physically touch them. And most of all I don't know why the 28 volt does not register in flipper In or out preventing me from starting a game.
Please help me through this because it's too specific to keep at what information is out there.
I need some good advice.