Mine does not deal the 'big screenshot damage' I see many people with their heavy attacks and ults. I hit the 50k HP requirement, got the weapon and everything. Or maybe he just needs super god rolls to reach Yangyang: xuanling damage numbers (my stats on her are way worse but drops half a mill damage just like that)
Hi peeps,
Recently got my Saturn 4 Ultra 16K and I've been tinkering the burn in layers ever since. I use standard gray resin by Anycubic and each print is really hard to remove from the build plate. Prints turn out perfect, supports are easy to remove but the resin base feels superglued to the plate.. I use lychee slicer and started with the base settings 6 burn in layers, 25s exposure time (it was 30 by default preset by I lowered it). I ran with GK3 Pro for almost a year and never had such issue (there it was 5 burn in layers and 25 seconds but maybe it's easier since the build plate is not textured and just smooth). Even if I managed to get my scraper in, the raft starts shattering when doing the typical lift motion I'd do on GK3 Pro, therefore, the brittleness of the resin pointed towards overexposure at 25 still. So I checked through reddit and with different AIs for solution but nothing helped. Kept lowering the parameters in regard to the burn in layers, tried different rafts and raised the thickness of the raft itself as the default was 0.5 mm. 1 mm did not help, tried 1.3 and it was extremely tedious to remove. I have pasted below a screenshot of my current settings. Should I keep lowering? I think the only things I haven't tried are - sanding the build plate (seems like a last resort) and freezing the buildplate with the print so it released due to thermal contraction. I have tried with hot water and it definitely helps but it's such a big chore to take care of the bucket of contaminated water, waiting for the resin to settle, curing it, filtering the blobby parts, curing them and disposing them separately. So I'd prefer to fix the issue without the need of such roundabouts. I know the saturn screen wavelenght is different from the gk3 pro and it seems a lot more intense as per some users, lowering the percentage of the brightness (I haven't tried that since it is pretty well synced with the print object and supports). I hope someone uses the same resin so they can send me their settings. Thanks in advance!
