MISSION 1 Pro battery drain while powered off, overheating, and random boot freezes
Hi everyone,
I recently received my MISSION 1 Pro and I am having several concerning issues.
The camera loses battery even while it is fully powered off. At first, I noticed around 15% battery loss overnight. Then I tested it more carefully:
- Wireless connections turned off
- GPS turned off
- Voice Control turned off
- microSD card removed
- camera disconnected from charging
Even with all of that disabled and no SD card inserted, it lost around 7% in approximately 55 minutes while powered off. During that time, the camera also became noticeably warm.
I also have random boot freezes. Earlier I thought this might be related to the microSD card, because the camera sometimes would not power on after being off for around 40 minutes unless I removed and reinserted the battery.
However, today the same thing happened again with no microSD card installed. The camera would not power on at all, and removing/reinserting the battery was the only thing that made it boot again.
I have already performed a factory reset and I will update the firmware, but this seems more serious than normal standby battery drain.
Has anyone experienced this combination of issues on the MISSION 1 Pro? Did a firmware update fix it, or did you end up returning/replacing the camera?
Thanks!