u/Austin-Ryder417

Hey folks, newbie here. I have been looking at pages and using the AI agent inside Fusion for all of yesterday. I still don't understand what is happening. I'm trying to create a project box for an Arduino project.

I have a drawing, two components. Box component is the box to hold the electronics. I created it first. I'm having trouble with Lid.

For Lid when I create a new sketch I select the plan that is the upper rim of the box because, the lid goes on top of the box 😄. I add a 2 point rectangle that size set to outer permitter of box (50mmx70xx). I want to extrude it expecting there to be one solid brick above the box. But what I get is an extrusion of the rim. Or, if I select inside the box during the extrude command I get an extrusion of the inner dimension of the box. But no way can I find to just make one big brick the same size as the outer perimeter of the box. I know this must be really simple and it seems like it should be based on all the reading I did but, I can't figure out what I am missing to get it to work. Thanks for any tips you can provide or pointers to tutorials that show how to do this.

https://preview.redd.it/reohw5szsi1h1.png?width=2752&format=png&auto=webp&s=cb7678e90152cd851a5ebeb0b0521ce4d505012c

Well today I thought I would be adventurous and go try charging at a Tesla charger instead of using my home L2 charger. This is just to try it out as I gear up for a long road trip. So I drive over to the local Fred Meyer which has a long row of Tesla chargers and always many Teslas in there charging. Back my Ioniq 5 into a stall, get out my $300 adapter I got from the Hyundai dealership, connect it to the charge station cable and guess what? The cable is too short to reach the I5 charge port. I notice all the Teslas in the line have the charge port on the drivers side and also, the charge station itself is off center in the parking stall so that only a car with a port in the exact spot as the Teslas would work. I could have made the cable reach if I used the cable in the stall next to mine but then I would be taking up two stalls to charge one car which I felt would be bad form. I noticed too that Fred Meyers Tesla charging farm doesn’t show up in my Tesla app. I just went there because I drive by it all the time so I knew where it was and it looks popular and well used. So, I guess Tesla has chargers that are not to be used with I5s adapter or not. Maybe I should just stick with the ones that are explicitly listed in the Tesla app? Anyone else notice this?

20 months since RALP. PSA <0.014 which is undetectable using the test our lab uses. ED has resolved on its own. Incontinence never was a problem. The stress of waiting for the test result is real. Man am I thankful for this group and all the medical care I got.

The short version of my story: 57yo, May 2024 PSA 4.7, MRI showed 1.8 cm PI-RADS (5) lesion in the left peripheral, fusion biopsy showed all cancer on the left 3+4=7, Grade Group 2. RALP on Sept 10 2024. Post RALP pathology showed no spread outside of prostate.