Login

u/BorderActive6939

r/22lr r/MacanEV
▲ 6 r/MacanEV

Anybody willing to part with front license plate bracket?

I just took delivery of a macan ev 4s from Carvana. I live in cali and am required to have a front plate. The morons drilled into the front to mount the plate without the bracket, and covered up the front camera. I need an oem bracket to raise the plate to the correct height and cover up the holes they made. Anyone living in a non-front plate state have one lying around they’d be willing to sell me?

reddit.com
u/BorderActive6939 — 9 days ago
▲ 16 r/22lr

Brand new M&P 15-22 damaged crown fixed

I decided to try to recrown my m&p 15-22 that came with a damaged crown from the factory. It was shooting a couple feet high and to the left. After removing flash hider it was clear there was a burr from the damage at the low right position deflecting the bullets high and left. I first ground down the damaged area with a 20mm diamond ball on a drill, then used progressively finer sand paper stuck to the ball with foam double tape. Then used a 8-32 brass round head screw to cut the final inner edge as seen on youtube. We’ll see how it shoots but I suspect better than from factory.

u/BorderActive6939 — 2 months ago
▲ 18 r/22lr

Brand new m&p 15-22 TERRIBLE accuracy.

Brand new M&P 15-22 is shooting about 2 feet high and left at 50yds. There is no way to zero the sights for windage or elevation due to how far off POI is. Grouping is all over the place. I read online the barrel nut can be loose causing this but the barrel is firm and the barrel nut is tight as far as I can tell by probing with a rod. I ordered a barrel nut tool to see if it needs to be tightened up but I also noticed the barrel crown has this divot in it. What do you guys think? Could the crown be the reason for this?

u/BorderActive6939 — 2 months ago