Sudden Bad “Ghosting”
Hi!
I’ve been having a bit of trouble with my CR-Laser Falcon Pro 10W with this double engraving it’s been doing on the X-Axis.
The first two images attached show the ghosting, then the last two images show my laser working as intended.
A little background on my machine:
I have been having what seems to be alignment issues when engraving, as I tried to make an alignment grid for the laser with the same laser, but the engraving would randomly stop without warning, misalign the same exact project when nothing physically moved, and would not be able to make the same circle twice.
I contacted Creality Support multiple times, but they’ve been very slow when it comes to responding.
I also tried updating the firmware on the machine as it shows as Firmware 1.0.0 within Falcon Design Space, but the machine refuses to update despite following the instructions to the tee.
Creality Support was informed of this, and they said the machines motherboard may be faulty and that I should receive and install a new one.
Despite all of this, the machine has worked on some projects as is. So I don’t understand why the machine just randomly got worse. The machine barely has 4 hours of use time.
Any ideas as to what may have caused this? Has anyone who owned this specific laser had issues with the motherboard or this “ghosting” problem?