Seadoo not starting
To to give some context, we were using the jet ski for about half an hour, and after that we fell off of the ski. got back on the ski and then it wouldn’t start and showed “engine” and now when the key is in with the engine cover off and plugs out it shows “sensor”
so we took it back out and we’ve now started to try and diagnose the problem. we have:
-Taken the Starter motor out and Checked to see if it spins freely and it does.
-Changed the Battery.
- Tried bridging the solenoid to see if the solenoid was the problem but still does not turn over after bridging.
-checked the flywheel after taking the motor out to see if it spins freely and it does.
- cranked the engine over and the engine isn’t seized it just seems to not be getting enough oomph to crank over quickly like it should be doing, almost like it’s being restricted in some way.
any help with getting this back up and going would be greatly appreciated :)