Just got a couple of the 140mm t30’s delivered. Opened up the first box and it was missing the corner rubber pieces on the front side. Opened the second box and they were all there on that fan. Regardless these fans are absolute units and will compliment my 12 other 120mm t30’s well. Just need to figure out how to get the four corner rubber pieces as I don’t want to have to go through the return process and reorder a new fan.
I am looking to add an additional 480mm rad to my current build. I am semi new to watercooling and have learned a couple things the hard way to include the need for a solid rinse of the radiator prior to running in a loop as all the flux and bs coats everything if not.
I used EK super flush and loop cleaner after that happened and rinsed with distilled after. Then had to take apart blocks to finish cleaning. I don’t want to go through that again.
I have heard multiple ways to flush them prior to running to include just distilled, distilled and vinigar, super flush ect but wanted experienced people to guide me in the right direction.
Currently I have my cpu on an aio and my gpu on a loop being cooled by a 360mm x45mm rad. I am going to be including my cpu into the loop and will be adding a 480mm. Any helpful guidance will be appreciated.