u/Dyst0p1an_dr3ad

Went to an indoor range to get my ps90 tri-rail sbr sighted in with its dedicated silencer, the Silent Steel Micro Streamer. It's definitely louder indoors than it was outdoors. Outside it sounded similar to my HuxWrx FLOW 762 ti.

Overall length of the gun is now 22.25", so about 1/4 inch shorter than a p90 with a tisha. The tisha is definitely a better suppressor, but it's also more expensive, and I hate the look of it on a p90.

2nd post of the day now that the micro streamer is home.

3 SBRs, 2 Cans. Top to bottom:

SBR PS90 USG.

SBR PS90 TRI-RAIL od green with od green Silent Steel Micro Streamer

SBR XF50 with strike stock, and HuxWrx FLOW 762 TI.

4.25 inches long, 5.56, low back pressure, od green to match the stock. Will compare it to the HuxWrx FLOW 762 TI and AB Little Bird.

Just picked up my Silent Steel Micro Streamer for one of my sbr ps90s. Can't wait to see how it does. Very odd suppressor. I will compare it to my flow 762 ti and ab little bird.

Also, I got a wolfpack armory RDT-S to help it sit closer to the receiver on the ps90, but the RDT-S wouldn't thread into ANY of the hub suppressors at the ffl.

Tri-rail, XF50/Strike, and classic USG.

Steiner mps sight and streamlight tlr9 light. 9mm, 40s&w, 10mm, 7.5fk.

Fk BRNO PSD SBR with all calibers and stock. 9mm, 40s&w, 10mm, 7.5FK. Steiner MPS sight, Streamlight TLR9 light.

I was looking at my different P90s trying to see if a recessed hub adapter might work, when I realized that my muzzle devices seemed to be different lengths, despite being the same device. So I took them off to look at my thread adapters, remembering that one is the cmmg one that u/emgunslinger checked for me, while the other was a gemtech. The gemtech is significantly shorter, and lacks wrench flats that the cmmg has.

​

My caliper battery is dead, and I don't have more, apologies.

​

Just thought this was interesting, and I'd live to hear from u/emgunslinger to get his thoughts.

​

How do you guys feel about making the xf50/ strike stock night vision build look more like a classic p90 with the p90 style foregrip options

You may have seen that i modified a Hera Arms CQR to fit the build, but it honestly wasn't the most comfortable thing. It interfered with my firing hand grip at the middle finger. I tried cutting it down even more, but that kind of just ruined the look. Well, I found a nerf/airsoft grip that looks like the original p90 foregrip, and is comfortable. Let me know your thoughts.

I'm interested in the Micro Streamer for one of my SBR PS90s

Left to right

Night vision setup:

-xf50, strike stock, dbal d2, Steiner mps, flow 762 ti suppressor

-Keltec p17, little bird suppressor

-Omni 7 green phosphor dual tubes

-p90 chest rig (holds 4 mags, 2 extra pouches brings it to 6 mags)

Classic stargate:

-P90, ringsight, Arisaka 300 white light

-Psa rock 5.7, little bird suppressor, Holosun w/ P.A. reticle

-Atlantis grey uniform UF PRO

-Blackhawk omega medic vest (holds 4 extra mags)

Modern load out:

-Od green tri-rail p90, Holosun aems, P.A. 3x magnifier, Streamlight hlx w/ modbutton remote, flow 762 ti suppressor

-fk brno psd in 7.5fk, Streamlight tlr9, Steiner mps

-pencott greenzone UF PRO

-LBV w/ 6 USMC flair pouches (best p90 magazine pouch ever)

Left to right

Night vision setup:

-xf50, strike stock, dbal d2, Steiner mps, flow 762 ti suppressor

-Keltec p17, little bird suppressor

-Omni 7 green phosphor dual tubes

-p90 chest rig (holds 4 mags, 2 extra pouches brings it to 6 mags)

Classic stargate:

-P90, ringsight, Arisaka 300 white light

-Psa rock 5.7, little bird suppressor, Holosun w/ P.A. reticle

-Atlantis grey uniform UF PRO

-Blackhawk omega medic vest (holds 4 extra mags)

Modern load out:

-Od green tri-rail p90, Holosun aems, P.A. 3x magnifier, Streamlight hlx w/ modbutton remote, flow 762 ti suppressor

-fk brno psd in 7.5fk, Streamlight tlr9, Steiner mps

-pencott greenzone UF PRO

-LBV w/ 6 USMC flair pouches (best p90 magazine pouch ever)

The Stargate classic P90's ringsight glows.

The modetnized Tri-rail P90's suppressor glistens.

The Strike/XF50 P90's night vision... drips.

1st is my classic usg style PS90 SBR with kingsview ringsight, Arisaka 300 light, cmmg barrel and flash hider, and X-PRT90

2ND is my "modernized/A2" PS90 SBR discontinued Tri-rail with OD Green stock, cut down factory barrel and cmmg adapter from Mr Pickerell, Holosun AEMS sight, Primary Arms 3x magnifier, Streamlight hlx with Noxon Fuze switch mounted to Titan Tactical Modbutton mount, Arisaka adapter and Arisaka offset mount, and HuxWrx FLOW 762 TI

3RD is my night vision setup XF50 on the Strike SMC90 stock, with Shaw barrel, a custom cutdown Hera CQR foregrip, Steiner Dbal D2, Steiner MPS, Modbutton Crain plug on HRF Ramp mounted to left side rail, Inforce white light, and Cobalt Kinetics RCB HuxWrx Flow mounting brake.

Cut down the cqr to actually got the strike stock. While it definitely looks better cut down to fit, I don't think i like it any better than the magpul vert grip ergonomics

Finally got my stone stock for my xf50 that has a dbald2 and steiner mps sight.

I knew that it would require donor parts, so I had already had those parts ordered. Here are some thoughts:

As I stated to many people, the hera cqt grip is way too long. It will need to be cut down to look good.

This stock really does need the extended magazine release, the stock one is just way to small now due to the increased width of the strike stock.

My HuxWrx Flow 762 TI would not fit with the heat shield in place on that bottom front rail. It requires removing the shield, so now the suppressor does slightly come in contact with the plastic. I guess that's a problem that will quickly sort itself out once the suppressor gets hot enough.

Overall I like that is different, but i cannot say that i like it over my black or OD Green fn stocks. But it absolutely is good enough for my 3rd Ps90