Starter replacement 3.3 awd
I hope this helps whoever needs this. If your starter is out and its a 3.3 awd here is info I couldn't find..
No need to drop engine...however is more involved than rwd..
I was able to achieve it as such
Jack up both front sides remove tires (Jackstands)
Remove passanger wheel well
Both side upper strut bolts
Jack under engine
5.jack for each side subframe(may not be needed one may do idk)
Jack up subframe driverside to remove pressure remove bolts. Thread in 2 turns or enough to not strip set it on them
Passanger side repay except remove bolts keep Jack here.
Remove lower and upper motor mount also disconnect 3 holding tabs for trans lines starting at upper moving forward
8/9. Remove trans lines from radiator
This should be all u need but if u have questions feel free to reach out.
Also there is a tab I bent u will find it.