u/EveryBridge9964

Finally finished, only on Nextprint for now. I posted it here: https://www.nexprint.com/en/models/G9798812?printConfigId=G6573515.

2 Requests, if possible:

1. If you could have it be printed by May 18th
2. if you could please share images of make (so I can upload them with the print profile when fully released as I do not have the CANVAS system but want other people to see it when downloading it)

I have not fully finished assembly instructions but I can help you out via messages, etc. Simple assembly.

Requires 2 rolls of PETG/ABS *Not PLA* (but less than 2kg, like ~1.900)

The TopHat includes 10 diy (design it yourself) toolholders that when this is released in a week or so i will release the .step files for and the dimensions for so people can design their own things for the holders, as well as I will release some I already designed.

It includes 3 sets of vents that all can be opened or close, each independently controlled, and can also be partially opened and partially closed. It uses the original glass lid that came with the CC1, and is put on hinges, and can be easily removed via 2 3d printed screws

Thanks to the community for supporting this project and giving me helpful advice!

UPDATE 5/12 8:33 PM EST: BETA FILES WILL NO LONGER BE SHARED, ANYONE WHO WANTS TO PRINT MUST WAIT UNTIL PUBLIC RELEASE

The raised CANVAS connector allows for the tpu bypass, just on the other side. I can make a print profile for the bypass or you can just use the mirror tool in your slicer

2nd image is the sharpest angle the ptfe tubes would ever be at

would use the glass lid that everyone has so you can see into it. minimum distance from top lid to top of printer is ~120mm, compared to the ~230mm lid on the cc2. Just a concept. I don't think there would be too much strain on the ptfe tubes since its all the way towards the front anyways but maybe.