u/Fluffy_Fall_4924

scufgaming.com/s/icue-download

If your Scuf Valor Pro is stuck on an old firmware or the Companion App ignores it, the standard updater is dead-ended. You need the hidden installer from their iCUE page. The Fix:

1. Uninstall any old Scuf Updater tools from Windows and unplug the controller.
2. Go to scufgaming.com/s/icue-download, scroll down, and download the Valor Wired Firmware Update installer (it has the newest files).
3. Open the new tool, hold down the Left Stick (L3), and plug the USB cable into your PC to force bootloader mode.
4. Hit Update and let it flash.

Crucial Steps After: • Reset Calibration: Hold the back profile button until it flashes, then hold L3 + R3 for 3 seconds until it pulses white (otherwise the controller might feel "dead"). • Turn off Auto-Shutoff: Disable this in the Companion App settings, or the 1K polling rate will glitch out if the controller goes to sleep.

Yo, if your Scuf Valor Pro is stuck on v0.5.20 and won't update to v0.5.63 or if the companion app is just completely ignoring your controller here is the fix. I couldn’t find this anywhere online and spent ages figuring it out, but it actually works. The issue is that the standard updater tool Scuf gives you is outdated and dead-ended. You have to grab the one they hid on the iCUE page. Here’s exactly what to do:

1. Trash the old tool: Unplug your controller and completely uninstall the old Scuf Updater from your Windows apps.
2. Get the right installer: Go to the Scuf website and head over to the iCUE Download section. Download the firmware updater from there. It has the actual v0.5.63 files baked into it.
3. Force Bootloader mode: Open the new tool (don't plug the controller in yet). Hold down your Left Stick (L3) and then plug the USB cable into your PC.
4. Update: The tool should instantly see the controller now. Just hit update and let it flash to v0.5.63.
5. One last tip: Make sure to turn off Auto-Shutoff in the Companion App settings after the update. Some people reported that if the controller goes to sleep during a session, the 1K polling rate can glitch out until you unplug and replug it. Turning off auto shutoff completely fixes that!

Crucial step if the controller feels "dead" after updating: The new firmware wipes the stick calibration, so Windows or the Companion App might still act glitchy until you reset it. • To reset it: Hold the profile button on the back until the LED flashes, then press and hold L3 + R3 together for 3 seconds until it pulses white. After that, open the Companion App, calibrate your sticks, and you’re good to go with the 1K polling rate working perfectly. Hopefully, this saves someone from a massive headache!