HELP!
I was working on adding aftermarket ambient lights on my 2026 mach e select today, one of the steps to power the door lights was to splice into the positive and negative wires of the door module harness, While doing this my dumbass kept the var on to check if the splicing was successful. Now the deal is the lights work, I’m following the instructions specific to Mach-e this splice was done by multiple people who have reported no issues on the mach e forum but I ended up with multiple error codes, I first assumed this was due to the spike in power while I was splicing and cleared them with my OBD reader(not forscan). But the code came back within the minute, multiple errors all related to the door module, I’m yet to do a full reset(unplug 12v battery and plug back in) and try removing the splicers to see if that fixes the errors(hopefully haven’t damaged the module). But I’m curious as to why no one else has reported this issue before