Kodiaq grinding noise
Hi all, need some help.. I’ve got a kodiaq 2.0tdi 2021 sportline. When taking a sharp left turn, i’m getting some grinding noise coming from driver side front. Things i’ve checked are below.. Any other suggestions?
- Has new suspension strut and mount
- Had new wishbone and ball joint and droplink
- Has new cv joints (inner and outer)
- Had new wheel bearing
- Checked using a gopro style camera to see if the driveshaft was possibly touching the anti roll bar but it wasn’t
- Checked brake disk shield isn’t touching, even removed it completely
- Checked is not the wheel scraping on anything
-full lock the car in both directions and don’t get any noise, just when turning fast and the weight goes onto the right side of the car
- Check shaft isn’t hitting/touching the shaft cover next to the inner cv joint
- When turning normally i have no issues, it’s when i take a sharp turn or the vehicle weight shifts onto the driver side
-Subframe all bolted down properly using collar kit
- Inner and outer track rod was replaced
- No engine rumbling/shaking so don’t think it’s engine mount.
Any help or ideas as to what it could be?