Troubleshooting for Luba 1 cutting height
I was "lucky" to get a Luba 1 AWD 5000 for free, however, the graceful giver have had it standing outside for more than a year I all kind of weather.
I have already changed the battery, which was necessary to even get it up an running. Next problem is that I'm not able to change the cutting height from the maximum 70mm. Any lower, and the mower just stands still does nothing.
Example 1 - Setting up a task with cutting height 70mm, it starts cutting, if I manually adjust the cutting height while it is moving the unit stops. To restart it I need to pause the program, adjust the cutting height to 70mm and unpause the task.
Example 2 - setting up a task with less than 70mm cutting height, passes it's self check, unit drives out of its charger, goes to the starting point and then just sits there..
My though it that it might be related to either the cutting height adjuster motor or the encoder. I'm having a difficult time manually adjusting the cutting height through the app, or at least I'm not able to hear or see the cutting plane being lowered while trying.
Any suggestions on troubleshooting steps or recommendations on how to fix this issue?