u/Hot_Situation_3387

Hello everyone,

I’m new to the field and I recently equipped myself with an Apollo Twin X Gen 2 with the UAD Studio+ bundle 😎

I also took advantage of the « Pick 2 Plugin Bundle » offer at $99. My goal was to acquire the Neve 1073 and the CL1B compressor for sound recording, because after months of research, it was the ideal voice chain to record via the console. However, for lack of attention, I validated the 1073 and the Voxbox instead of the CL1B😭 Too bad... but the good side of things is that I no longer lack preamps for recording, knowing that the Studio+ offer already includes the Avalon VT-737.

I would like to collect your tips or tricks regarding my recording chain via the UAD console to Pro Tools Artist. Here are my planned configurations:

For RAP:

1073 in Unison, followed by an 1176, then Antares Auto-Tune directly in the console.

For Pop and sung voices:

1073, followed by an LA-2A, then Antares Auto-Tune.

Since everything will be recorded in « Rec » mode and not in « Monitor », I will add the reverberation or delay only in the console for monitoring.

Initially, I did not want to save the Auto-Tune directly to the socket so that I could modify it later in Pro Tools. However, I realized that the plug-in included in the UAD Studio+ bundle can only be used via the console. So I have no choice at the moment.

Not being a professional, I do my best. Your opinions and advice or even other channels are welcome,

Thanks in advance

Hello everyone,

I’m new to the field and I recently equipped myself with an Apollo Twin X Gen 2 with the UAD Studio+ bundle 😎

I also took advantage of the « Pick 2 Plugin Bundle » offer at $99. My goal was to acquire the Neve 1073 and the CL1B compressor for sound recording, because after months of research, it was the ideal voice chain to record via the console. However, for lack of attention, I validated the 1073 and the Voxbox instead of the CL1B😭 Too bad... but the good side of things is that I no longer lack preamps for recording, knowing that the Studio+ offer already includes the Avalon VT-737.

I would like to collect your tips or tricks regarding my recording chain via the UAD console to Pro Tools Artist. Here are my planned configurations:

For RAP:

1073 in Unison, followed by an 1176, then Antares Auto-Tune directly in the console.

For Pop and sung voices:

1073, followed by an LA-2A, then Antares Auto-Tune.

Since everything will be recorded in « Rec » mode and not in « Monitor », I will add the reverberation or delay only in the console for monitoring.

Initially, I did not want to save the Auto-Tune directly to the socket so that I could modify it later in Pro Tools. However, I realized that the plug-in included in the UAD Studio+ bundle can only be used via the console. So I have no choice at the moment.

Not being a professional, I do my best.

Your opinions and advice on the adjustments to be made (entry gain, compression threshold...) or even other channels are welcome,

Thanks in advance

Bonjour à tous,

Je débute dans le domaine et je me suis récemment équipé d’une Apollo Twin X Gen 2 avec le bundle Studio+ d’UAD 😎

J’ai également profité de l’offre « Pick 2 Plugin Bundle » à 99 dollars. Mon objectif était d’acquérir le Neve 1073 et le compresseur CL1B pour la prise de son, car après des mois de recherches, c’était la chaîne vocale idéale pour enregistrer via la console. Cependant, par manque d'attention, j'ai validé le 1073 et le Voxbox à la place du CL1B😭 Tant pis... mais le bon côté des choses, c'est que je ne manque désormais plus de préamplis pour l'enregistrement, sachant que l'offre Studio+ inclut déjà l'Avalon VT-737.

J’aimerais recueillir vos conseils ou astuces concernant ma chaîne d'enregistrement via la console UAD vers Pro Tools Artist. Voici mes configurations envisagées :

Pour le RAP :
1073 en Unison, suivi d'un 1176, puis d'Antares Auto-Tune directement dans la console.

Pour la Pop et les voix chantées :
1073, suivi d'un LA-2A, puis d'Antares Auto-Tune.

Puisque tout sera enregistré en mode « Rec » et non en « Monitor », j'ajouterai la réverbération ou le délai uniquement dans la console pour le monitoring.

Initialement, je ne voulais pas enregistrer l'Auto-Tune directement à la prise pour pouvoir le modifier ultérieurement dans Pro Tools. Cependant, je me suis rendu compte que le plug-in inclus dans le bundle UAD Studio+ ne peut être utilisé que via la console. Je n'ai donc pas le choix pour le moment.

N'étant pas un professionnel, je fais de mon mieux. Vos avis et conseils ou même d’autre chaînes sont les bienvenus,
merci d'avance