u/J_Wilson_621

I'm calling it good now on this one. Worked on it for a few days, and I'm quite frankly sick of twealing it. That and I Finally got the lower section shaped how I'd like and am quite satisfied with the end result! Use of Gilibran, Intrinity, Matilijia, ASC-TAIYO, and Inquisitor EM for the lower section.

Added Decorative Engines for the refit variant of the Excelsior class on the saucer

Pathfinder for scale in photo 4.

Now... What to make next?

I added habs to the lower section, and an elevator to the Saucer. I increased the height, made a more pronounced neck, added finishing touches to the nacelles, and shortened the lower section by about 1 hab, while also cleaning up the profile with the ASC-TAIYO shell. Managed to more cleanly add a real cockpit that has a LOT more crew capacity.

If I don't stop messing with it, I'll probably mess it up so this will likely be the last update for it. Unless I do something drastic.

(Andreja for scale in last photo XD)

Finished the ship, and I'm quite happy with the result! Though Constitution 3 is already taken, upon further research. So name TBD.

Edit: after much deliberation the class is now called Copernicus class. Because that where I built it, and why not? XD

Mods are the same, Except for the use of Inquisitor EM for the front as opposed to the dish.

Calling this one a WIP because I'm not FULLY happy with it, but I call it the Constitution 3 Class

Now utilizing Avontech for the nacelles and engines, Falkland for the Saucer, ASC-TAIYO for some finishing touches, Perditus Fleet for weapons, and Inquisitor Star Trek Ship Modules for the dish.

I changed the cockpit since the last post, but here's the interiors as requested! Complete with OwlTech warp core!

My newest addition to the (Star)fleet, the NX-01! Same mods as my Reliant

(Yes I planned that)

Now finished as far as I can, the new and improved Miranda Class - U.S.S. Reliant

Now fully utilizing the Starbase 42 add-on to Perditus Fleet, and Doc's Photo Frames! All mods are the same as before otherwise

Took a break from one Star just to move to another! Introducing my WIP Miranda Class ship!

Due to popular demand here's my tutorial!

Picture 1: Outer shell components. They are almost entirely ASC-TAIYO. BUT There's a Nova Galactic piece that I believe was added with Terran Armada. This will need to be merged with the Sail The Stars Docker. I also use decorative engines for the back to keep the main wing engine speed. Decorative fuel tanks are below the decorative engines.

Picture 2 & 3: habs, cockpit, reactor, landing bay, landing gear, engine wing (from Antares Fulcrum).

4: docker (from Sail the Stars)

5: Cockpit is from Matilijia Aerospace and is a new addition

6: SPE Reactor. (You can use any 1x1 reactor, but I like SPE for the hab aspect. I also recommend B or higher, but you only REALLY need class A)

7: rear landing gear

8: cargo

9-11: Intrinity Deimos Bow Fore used for shape. Must be flipped and merged over the NG-20 Landing gear. (This is the reason for the OwlTech 1x1 brig. Otherwise there would be interior clipping)

12: MUST use rear facing landing bay with a LADDER. Otherwise you'll get stuck exiting the ship, and won't be able to move out from under it. (This happened once. Learned the hard way)

13: micro cheat module (you don't need this I just like to use it because I hate worrying about reactor power and cargo capacity)

14: ETA-2 fuel tank for grav jumps, and space saving

15: N-1 "M" grab drive for space saving.

I would upload a video but I don't have a capture card and I play on console. I also don't have a PC at all.

I hope this helps!

Since I figured out how to make this ship, and since the ship is called the Mantis. I had to grab the Razorleaf and completely rebuild it as a Mantis. For the Mantis' Mantis

Yes I posted the last 3 Outriders, but I took a break from it!

....And made ANOTHER Star Wars ship.... The Mantis! Using Antares Fulcrum, Falkland for Habs, Matillijia Aerospace for the Cockpit, Electionis ETA ACTIS for the miniature fuel tanks, shields, and grab drive, Sail The Stars for the docker, and ASC-TAIYO for the paneling.

I can't stop messing with it. But this time Falkland cannons had their barrels. And I tweaked the outside again, using ACS-TAIYO vertical spacer to correctly mount the 3 vents on the aft. And using the Millennium Falcon mod for landing gear.

By request

My Outrider with reference photo

Mostly based on the YT-2000, but since I couldn't get THOSE mandibles right I just renamed it