SPC9 FRT - Cloak Ind
I received my FRT from the pre-order. Fit and finish was as advertised. Install was straight forward and it works semi and safe. BUT FRT mode is not working. When flipped to FRT the trigger is not fully resetting and locking so I am getting hammer follow with a dead trigger. I am getting full extraction and rechambering of the next round but the hammer is following the bolt home with a dead trigger. Dry fire testing with no pressure on the trigger seems to work correctly and the trigger is visabily resting and audibly locking. ANY pressure on the trigger while dry testing and it is not resetting. Have used several different ammo manufactures and having the same issue.
FYI, not my first FRT and I am not over squeezing the trigger. I have tried varying pressure with just enough pressure to get the initial break. I have even tried to quickly fire the first round and release to try and see if that would allow the trigger to reset but I still am getting the same result. Emailed Cloak but figured I would post here as well.