u/JoaTy2422

I apologize for my language, was recorded for a friend. This was the second tall part to fail, and i think i have narrowed it down to my Acceleration being at 2500mm/s (Didn't know that speed was possible). The first part that failed was printed at 250mm/s print speed and 2500mm/s acceleration, it jarred itself loose. The above video was a different part that i set to 50% Speed, so printing at around 125mm/s but since i had no clue i could change the acceleration it was at 2500mm/s. i have resliced the first failure to be 100mm/s Print Speed and 300mm/s Acceleration, and will set it to print in about 8 hours or so when i wake up.

Is there anything else i should change before i try to print the item?

• Neptune 4 MAX
• Cura (Slicer)
• ELEGOO PETG Transparent Filament
• 240F and 60F (Nozzle and Bed)
• Start at 300mm/s, then 150mm/s
• 0.5mm Distance, 45mm/s Speed