Anyone knows why this loud high pitched noise started? During print thought it could be the toolhead moving but it remained after the print is done. Is it from the fan cooling the printer down?
ESUN PETG printing with generic PETG preset. What might be going wrong with it? Do I need to slow down the printer from the standard speed of the p2s? Support have been used on the overhang part of the model.
Why do these lines happen? Can’t find a solution to it. Is it separating? Too much cooling, too little cooling? Is the noozle temp not right? Matte PLA from Bambu. Dried. Bambu preset on the P2S. Noozle 220 and bed temp 55. Would love to get some input on how to possible fix it.
At the same height as support have been printed I’ve noticed separation of the layer next to it. Is it due to too much cooling? Bambus own PLA Matte for the P2S has 100% cooling on the part/noozle fan at all times including the aux at 100% as well except at the first layer. Should one lower the speed of the fans so it doesn’t separate? This was a 15 hour print on the 0.08 profile so it sucks that this happened. I have the BL Matte Charcoal printing at 220c at a bed temp of 55c and the chamber sits at 32-35c during the whole print. Filament in the AMS 2 pro and dried before use.